Coverart for item
The Resource Analysis and design of power converter topologies for application in future more electric aircraft, Amit Kumar Singh, (electronic book)

Analysis and design of power converter topologies for application in future more electric aircraft, Amit Kumar Singh, (electronic book)

Label
Analysis and design of power converter topologies for application in future more electric aircraft
Title
Analysis and design of power converter topologies for application in future more electric aircraft
Statement of responsibility
Amit Kumar Singh
Creator
Author
Subject
Language
eng
Summary
This thesis proposes new power converter topologies suitable for aircraft systems. It also proposes both AC-DC and DC-DC types of converters for different electrical loads to improve the performance these systems. To increase fuel efficiency and reduce environmental impacts, less efficient non-electrical aircraft systems are being replaced by electrical systems. However, more electrical systems requires more electrical power to be generated in the aircraft. The increased consumption of electrical power in both civil and military aircrafts has necessitated the use of more efficient electrical power conversion technologies. This book presents acomprehensive mathematical analysis and the design and digital simulation of the power converters. Subsequently it discusses the construction of the hardware prototypes of each converter and the experimental tests carried out to verify the benefits of the proposed solutions in comparison to the existing solutions
Member of
Cataloging source
GW5XE
http://library.link/vocab/creatorName
Singh, Amit Kumar
Dewey number
621.3815/322
Illustrations
illustrations
Index
no index present
LC call number
TK7872.C8
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
Series statement
Springer theses,
http://library.link/vocab/subjectName
  • Electric current converters
  • Hybrid electric airplanes
  • Energy
  • Energy Systems
  • Power Electronics, Electrical Machines and Networks
  • Physics of Energy Technology
  • Aerospace Technology and Astronautics
Label
Analysis and design of power converter topologies for application in future more electric aircraft, Amit Kumar Singh, (electronic book)
Instantiates
Publication
Note
"Doctoral thesis accepted by the National University of Singapore, Singapore."
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Intro; Supervisor's Foreword; Parts of this thesis have been published in the following articles:JournalsA. K. Singh, E. Jeyasankar, P. Das and S.K. Panda, "A Matrix Based Non-isolated Three Phase AC-DC Rectifier With Large Step Down Voltage Gain," in IEEE Transactions on Power Electronics, vol. 32, no. 6, pp. 4796-4811, June 2017. (Published)A. K. Singh, E. Jeyasankar, P. Das, S. Panda, "A Single-Stage Matrix Based Isolated Three Phase AC-DC Converter with Novel Current Commutation," in IEEE Transactions on Transportation ; Acknowledgements; Declaration; Contents; Acronyms; List of Figures
  • List of TablesSummary; 1 Introduction; 1.1 Aircraft System; 1.1.1 Electrical Power System in Commercial Aircrafts; 1.1.2 DC -- DC Converter for Military Aircraft; 1.2 Objective and New Contributions of This Work; 1.3 Outline of the Thesis; 1.4 Conclusion; References; 2 A Matrix Based Non-isolated Three Phase AC-DC Converter; 2.1 Introduction; 2.2 A Brief Review of Three Phase Non-isolated Buck Rectifier; 2.3 New Contributions of the Chapter; 2.4 Topology, Modulation Scheme and Principle of Operation; 2.4.1 Assumptions; 2.4.2 Modulation Scheme; 2.4.3 Modes of Operation
  • 2.5 Steady State Analysis and Design2.5.1 Voltage Gain of the Converter; 2.5.2 Voltage Stresses; 2.5.3 Current Stresses; 2.5.4 Estimation of the Input and Output Voltage/Current Ripple for the Proposed Matrix Based AC-DC Converter; 2.5.5 Filter Design; 2.5.6 Effect of Modulation Index (m) on the THD of the Input Line Current; 2.6 Simulation of the Proposed Converter; 2.7 Closed Loop Control of the Proposed Converter; 2.7.1 Small Signal Modelling of the Proposed Converter; 2.7.2 Closed Loop Controller Design; 2.7.3 Simulation Result; 2.8 Comparative Loss Evaluation of the Proposed Converter
  • 2.8.1 Semiconductor Losses in the Proposed Converter2.8.2 Semiconductor Losses in the Traditional Six Switch Buck Rectifier; 2.8.3 Snubber Loss in the Proposed Converter and Six Switch Buck Rectifier; 2.8.4 Comparison of the Semiconductor Losses in the Proposed and the Traditional Six Switch Buck Rectifier; 2.9 Experimental Verification; 2.9.1 Prototype and Structure; 2.9.2 Controller; 2.9.3 Experimental Results; 2.10 Benchmarking of the Proposed Converter; 2.11 Conclusion; References; 3 A Matrix Based Isolated Three Phase AC-DC Converter; 3.1 Introduction
  • 3.2 Brief Review of the Isolated AC-DC Converter3.3 New Contribution of the Chapter; 3.4 Topology and Principle of Operation; 3.5 Steady State Analysis and Design; 3.5.1 Derivation of the Output Voltage of the Proposed Converter; 3.5.2 Voltage Stress/Current Stress of the Converter; 3.5.3 Magnetics Design; 3.5.4 Effect of Adding Series Capacitor and Its Design Consideration; 3.6 Simulation of the Proposed Converter; 3.7 Digital Implementation of the Proposed SVM Based ... ; 3.7.1 DSP Implementation; 3.7.2 FPGA Implementation; 3.8 Experimental Verification; 3.8.1 Experimental Results
Extent
1 online resource (xxxiv, 188 pages)
Form of item
online
Isbn
9789811082139
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other control number
10.1007/978-981-10-8213-9
Other physical details
illustrations (some color).
System control number
  • on1032302524
  • (OCoLC)1032302524
Label
Analysis and design of power converter topologies for application in future more electric aircraft, Amit Kumar Singh, (electronic book)
Publication
Note
"Doctoral thesis accepted by the National University of Singapore, Singapore."
Bibliography note
Includes bibliographical references
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Intro; Supervisor's Foreword; Parts of this thesis have been published in the following articles:JournalsA. K. Singh, E. Jeyasankar, P. Das and S.K. Panda, "A Matrix Based Non-isolated Three Phase AC-DC Rectifier With Large Step Down Voltage Gain," in IEEE Transactions on Power Electronics, vol. 32, no. 6, pp. 4796-4811, June 2017. (Published)A. K. Singh, E. Jeyasankar, P. Das, S. Panda, "A Single-Stage Matrix Based Isolated Three Phase AC-DC Converter with Novel Current Commutation," in IEEE Transactions on Transportation ; Acknowledgements; Declaration; Contents; Acronyms; List of Figures
  • List of TablesSummary; 1 Introduction; 1.1 Aircraft System; 1.1.1 Electrical Power System in Commercial Aircrafts; 1.1.2 DC -- DC Converter for Military Aircraft; 1.2 Objective and New Contributions of This Work; 1.3 Outline of the Thesis; 1.4 Conclusion; References; 2 A Matrix Based Non-isolated Three Phase AC-DC Converter; 2.1 Introduction; 2.2 A Brief Review of Three Phase Non-isolated Buck Rectifier; 2.3 New Contributions of the Chapter; 2.4 Topology, Modulation Scheme and Principle of Operation; 2.4.1 Assumptions; 2.4.2 Modulation Scheme; 2.4.3 Modes of Operation
  • 2.5 Steady State Analysis and Design2.5.1 Voltage Gain of the Converter; 2.5.2 Voltage Stresses; 2.5.3 Current Stresses; 2.5.4 Estimation of the Input and Output Voltage/Current Ripple for the Proposed Matrix Based AC-DC Converter; 2.5.5 Filter Design; 2.5.6 Effect of Modulation Index (m) on the THD of the Input Line Current; 2.6 Simulation of the Proposed Converter; 2.7 Closed Loop Control of the Proposed Converter; 2.7.1 Small Signal Modelling of the Proposed Converter; 2.7.2 Closed Loop Controller Design; 2.7.3 Simulation Result; 2.8 Comparative Loss Evaluation of the Proposed Converter
  • 2.8.1 Semiconductor Losses in the Proposed Converter2.8.2 Semiconductor Losses in the Traditional Six Switch Buck Rectifier; 2.8.3 Snubber Loss in the Proposed Converter and Six Switch Buck Rectifier; 2.8.4 Comparison of the Semiconductor Losses in the Proposed and the Traditional Six Switch Buck Rectifier; 2.9 Experimental Verification; 2.9.1 Prototype and Structure; 2.9.2 Controller; 2.9.3 Experimental Results; 2.10 Benchmarking of the Proposed Converter; 2.11 Conclusion; References; 3 A Matrix Based Isolated Three Phase AC-DC Converter; 3.1 Introduction
  • 3.2 Brief Review of the Isolated AC-DC Converter3.3 New Contribution of the Chapter; 3.4 Topology and Principle of Operation; 3.5 Steady State Analysis and Design; 3.5.1 Derivation of the Output Voltage of the Proposed Converter; 3.5.2 Voltage Stress/Current Stress of the Converter; 3.5.3 Magnetics Design; 3.5.4 Effect of Adding Series Capacitor and Its Design Consideration; 3.6 Simulation of the Proposed Converter; 3.7 Digital Implementation of the Proposed SVM Based ... ; 3.7.1 DSP Implementation; 3.7.2 FPGA Implementation; 3.8 Experimental Verification; 3.8.1 Experimental Results
Extent
1 online resource (xxxiv, 188 pages)
Form of item
online
Isbn
9789811082139
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other control number
10.1007/978-981-10-8213-9
Other physical details
illustrations (some color).
System control number
  • on1032302524
  • (OCoLC)1032302524

Library Locations

Processing Feedback ...