Coverart for item
The Resource Challenges in mechanics of time dependent materials : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, Alex Arzoumanidis, H. Jerry Qi, Meredith Silberstein, Alireza Amirkhizi, Jevan Furmanski, Hongbing Lu, editors.

Challenges in mechanics of time dependent materials : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, Alex Arzoumanidis, H. Jerry Qi, Meredith Silberstein, Alireza Amirkhizi, Jevan Furmanski, Hongbing Lu, editors.

Label
Challenges in mechanics of time dependent materials : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics, Volume 2
Title
Challenges in mechanics of time dependent materials
Title remainder
Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics
Title number
Volume 2
Statement of responsibility
Bonnie Antoun, Alex Arzoumanidis, H. Jerry Qi, Meredith Silberstein, Alireza Amirkhizi, Jevan Furmanski, Hongbing Lu, editors.
Creator
Contributor
Editor
Subject
Genre
Language
eng
Member of
Cataloging source
N$T
Dewey number
620.11
Index
no index present
LC call number
TA401.3
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2016
http://bibfra.me/vocab/lite/meetingName
SEM Conference & Exposition on Experimental and Applied Mechanics
Nature of contents
dictionaries
http://library.link/vocab/relatedWorkOrContributorName
  • Antoun, Bonnie
  • Arzoumanidis, Alex
  • Qi, H. Jerry
  • Silberstein, Meredith
  • Amirkhizi, Alireza
  • Furmanski, Jevan
  • Lu, Hongbing
Series statement
Conference Proceedings of the Society for Experimental mechanics series
http://library.link/vocab/subjectName
  • Mechanics, Applied
  • Testing
  • Materials
Label
Challenges in mechanics of time dependent materials : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, Alex Arzoumanidis, H. Jerry Qi, Meredith Silberstein, Alireza Amirkhizi, Jevan Furmanski, Hongbing Lu, editors.
Instantiates
Publication
Antecedent source
unknown
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Preface; Contents; Chapter 1: Cracking and Durability of Composites in a Marine Environment; 1.1 Introduction; 1.2 Laboratory Experimental Set-Up; 1.2.1 Composite Materials and Specimens; 1.2.2 Intra-laminar Cracks Detection Methods; 1.3 Results Analysis and Discussion; 1.3.1 Image Processing; 1.3.2 Cluster Analysis of AE Data; 1.3.3 Evolution of Crack Density; 1.4 Conclusion; References; Chapter 2: Analyses of Nanoscale to Microscale Strength and Crack-Tip Stresses Using Nanomechanical Raman Spectroscopy in IN-6...; References
  • Chapter 3: High Creep Resistance of Titanium Aluminides Sintered by SPS3.1 Introduction; 3.2 Spark Plasma Sintering; 3.3 GE 48-2-2 by SPS; 3.4 Near-Lamellar Microstructure of the IRIS Alloy by SPS; 3.5 Conclusion; References; Chapter 4: An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers; 4.1 Background; 4.2 Sample Preparation; 4.3 Experimental Method; 4.3.1 Single Fiber Heater; 4.3.2 Custom Grips; 4.3.3 Quasi-static and Intermediate Strain-Rate Experiments; 4.3.4 Dynamic Strain-Rate Experiments; 4.4 Results and Discussion
  • 4.4.1 Breaks in Gage Length4.4.2 Strain-to-Failure; 4.5 Conclusions; 4.6 Future Work; References; Chapter 5: Life Prediction of CFRP Laminates Based on Accelerated Testing Methodology; 5.1 Introduction; 5.2 Time-Temperature Superposition (TTSP); 5.3 Master Curves of Strengths for CFRP Laminates; 5.4 Statistical Formulation of Master Curve; 5.4.1 Static Strength Master Curve; 5.4.2 Creep Strength Master Curve; 5.4.3 Fatigue Strength Master Curve; 5.5 Applicability of Accelerated Testing Methodology (ATM); 5.5.1 Tensile Static Strength Master Curve for Unidirectional CFRP [7]
  • 5.5.2 Tensile Creep Strength Master Curve for Unidirectional CFRP [7]5.5.3 Long-term Static and Fatigue Strengths of Unidirectional CFRP [5]; 5.5.4 Prediction of Open Hole Compressive Failure for Quasi-isotropic CFRP Laminates by MMF/ATM Method [8]; 5.6 Conclusions; References; Chapter 6: Rate Dependent Interfacial Properties Using the JKR Experimental Technique; 6.1 Introduction; 6.2 Experiment; 6.3 Results; 6.4 Conclusions; References; Chapter 7: Bio-based Composites as Thermorheologically Complex Materials; 7.1 Introduction; 7.1.1 Creep Modeling; 7.1.1.1 Betten (Nutting) Power Law
  • 7.1.1.2 Findley Power Law7.2 Materials and Methods; 7.3 Results and Discussion; 7.4 Conclusion; References; Chapter 8: Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder; 8.1 Introduction; 8.2 Viscoelastic Theory; 8.2.1 Viscoelastic Wave Propagation in Hollow Cylinder; 8.2.2 Viscoelastic Model for PMMA; 8.3 Experimental Methods; 8.4 Experimental and Analytical Results; 8.4.1 Attenuative and Dispersive Properties of Longitudinal Waves in Hollow Cylinder; 8.4.2 Separation of Plural Mode Vibrations; 8.5 Conclusions; References
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9783319415437
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
ocn958936703
Label
Challenges in mechanics of time dependent materials : Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, Alex Arzoumanidis, H. Jerry Qi, Meredith Silberstein, Alireza Amirkhizi, Jevan Furmanski, Hongbing Lu, editors.
Publication
Antecedent source
unknown
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • Preface; Contents; Chapter 1: Cracking and Durability of Composites in a Marine Environment; 1.1 Introduction; 1.2 Laboratory Experimental Set-Up; 1.2.1 Composite Materials and Specimens; 1.2.2 Intra-laminar Cracks Detection Methods; 1.3 Results Analysis and Discussion; 1.3.1 Image Processing; 1.3.2 Cluster Analysis of AE Data; 1.3.3 Evolution of Crack Density; 1.4 Conclusion; References; Chapter 2: Analyses of Nanoscale to Microscale Strength and Crack-Tip Stresses Using Nanomechanical Raman Spectroscopy in IN-6...; References
  • Chapter 3: High Creep Resistance of Titanium Aluminides Sintered by SPS3.1 Introduction; 3.2 Spark Plasma Sintering; 3.3 GE 48-2-2 by SPS; 3.4 Near-Lamellar Microstructure of the IRIS Alloy by SPS; 3.5 Conclusion; References; Chapter 4: An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers; 4.1 Background; 4.2 Sample Preparation; 4.3 Experimental Method; 4.3.1 Single Fiber Heater; 4.3.2 Custom Grips; 4.3.3 Quasi-static and Intermediate Strain-Rate Experiments; 4.3.4 Dynamic Strain-Rate Experiments; 4.4 Results and Discussion
  • 4.4.1 Breaks in Gage Length4.4.2 Strain-to-Failure; 4.5 Conclusions; 4.6 Future Work; References; Chapter 5: Life Prediction of CFRP Laminates Based on Accelerated Testing Methodology; 5.1 Introduction; 5.2 Time-Temperature Superposition (TTSP); 5.3 Master Curves of Strengths for CFRP Laminates; 5.4 Statistical Formulation of Master Curve; 5.4.1 Static Strength Master Curve; 5.4.2 Creep Strength Master Curve; 5.4.3 Fatigue Strength Master Curve; 5.5 Applicability of Accelerated Testing Methodology (ATM); 5.5.1 Tensile Static Strength Master Curve for Unidirectional CFRP [7]
  • 5.5.2 Tensile Creep Strength Master Curve for Unidirectional CFRP [7]5.5.3 Long-term Static and Fatigue Strengths of Unidirectional CFRP [5]; 5.5.4 Prediction of Open Hole Compressive Failure for Quasi-isotropic CFRP Laminates by MMF/ATM Method [8]; 5.6 Conclusions; References; Chapter 6: Rate Dependent Interfacial Properties Using the JKR Experimental Technique; 6.1 Introduction; 6.2 Experiment; 6.3 Results; 6.4 Conclusions; References; Chapter 7: Bio-based Composites as Thermorheologically Complex Materials; 7.1 Introduction; 7.1.1 Creep Modeling; 7.1.1.1 Betten (Nutting) Power Law
  • 7.1.1.2 Findley Power Law7.2 Materials and Methods; 7.3 Results and Discussion; 7.4 Conclusion; References; Chapter 8: Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder; 8.1 Introduction; 8.2 Viscoelastic Theory; 8.2.1 Viscoelastic Wave Propagation in Hollow Cylinder; 8.2.2 Viscoelastic Model for PMMA; 8.3 Experimental Methods; 8.4 Experimental and Analytical Results; 8.4.1 Attenuative and Dispersive Properties of Longitudinal Waves in Hollow Cylinder; 8.4.2 Separation of Plural Mode Vibrations; 8.5 Conclusions; References
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9783319415437
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
ocn958936703

Library Locations

Processing Feedback ...