Coverart for item
The Resource Challenges in mechanics of time dependent materials : Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, editor, (electronic book)

Challenges in mechanics of time dependent materials : Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, editor, (electronic book)

Label
Challenges in mechanics of time dependent materials : Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Volume 2
Title
Challenges in mechanics of time dependent materials
Title remainder
Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics
Title number
Volume 2
Statement of responsibility
Bonnie Antoun, editor
Creator
Contributor
Editor
Subject
Genre
Language
eng
Summary
Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2015SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Time-dependence in Metallic Materials Rate and Time Effects Additive Manufacturing General Materials Response
Member of
Cataloging source
N$T
Dewey number
620.5
Index
no index present
LC call number
TA349
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2015
http://bibfra.me/vocab/lite/meetingName
Annual Conference on Experimental and Applied Mechanics
Nature of contents
dictionaries
http://library.link/vocab/relatedWorkOrContributorName
Antoun, Bonnie
Series statement
Conference proceedings of the Society for Experimental Mechanics series
http://library.link/vocab/subjectName
Mechanics, Applied
Label
Challenges in mechanics of time dependent materials : Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, editor, (electronic book)
Instantiates
Publication
Antecedent source
unknown
Bibliography note
""References""""Chapter 5: Interaction of Shock Wave with Granular Materials""; ""5.1 Introduction""; ""5.2 Experimental Aspects""; ""5.3 Results and Discussion""; ""5.4 Conclusion""; ""References""; ""Chapter 6: Characterisation of Viscoelastic Material Properties During Curing Processes""; ""6.1 Introduction""; ""6.2 Method""; ""6.2.1 Material""; ""6.2.2 Cure Kinetics""; ""6.2.3 Viscoelastic Characterisation""; ""6.3 Results and Analysis""; ""6.3.1 DSC""; ""6.3.2 DMTA""; ""6.4 Discussion and Concluding Remarks""; ""References""
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • ""Preface""; ""Contents""; ""Chapter 1: Thermal Degradation of Extension Springs""; ""1.1 Introduction""; ""1.2 Experimental Procedures""; ""1.3 Results""; ""1.4 Summary""; ""Reference""; ""Chapter 2: Effect of Applied Temperature and Strain Rate on Laser Welded Stainless Steel Structures""; ""2.1 Material""; ""2.2 Tensile Specimen Geometry""; ""2.3 Wedge Specimen Geometry""; ""2.4 Weld Penetration Depth Quantification""; ""2.5 Experimental Results: Tensile Characterization""; ""2.6 Experimental Results: Wedge Specimens Loaded in Bending/Shear and Tension""; ""2.7 Summary""; ""References""
  • ""Chapter 3: Process Modeling and Experiments for Forging and Welding""""3.1 Introduction""; ""3.2 Material Model""; ""3.3 Experiments and Simulations""; ""3.3.1 Forging""; ""3.3.2 Welding""; ""3.3.3 Measurements of Recrystallized Volume Fraction and Hardness""; ""3.4 Results""; ""3.5 Conclusions""; ""References""; ""Chapter 4: Time-Dependent Viscoplastic Model for Dislocation Generation During the Cooling Process in the Silicon Ingot""; ""4.1 Introduction""; ""4.2 3 Dimensional Time-Dependent Haasen-Sumino Viscoplastic Model""; ""4.3 Results and Discussion""; ""4.4 Conclusions""
  • ""Chapter 7: Structure-Property Relationships in Bimodal Polyethylene from Indentation Measurements""""7.1 Introduction""; ""7.2 Experimental Details ""; ""7.3 Results and Discussions""; ""7.4 Conclusion""; ""References""; ""Chapter 8: Prediction Validation of Thermal Aging Performance of Military Composite Bridges""; ""8.1 Introduction""; ""8.2 Composite System""; ""8.3 Analysis Method""; ""8.4 Test and Simulation Procedures""; ""8.5 Test Specimens""; ""8.6 Simulation Models""; ""8.7 Test and Simulation Results""
  • ""8.7.1 Control: Mechanical Properties Prior to Thermal Cycling or UV Exposure""""8.7.2 No-Load Thermal Cycling and Subsequent Mechanical Loading""; ""No-Load Thermal Cycling (50 Cycles from -27.4 to 159.8 °F)""; "" Tension Subsequent to the No-Load Thermal Cycling""; "" Compression Subsequent to the No-Load Thermal Cycling""; "" Mechanical Fatigue Subsequent to the No-Load Thermal Cycling""; ""8.7.3 Impact and Post Impact Mechanical Properties After 50 No-Load Thermal Cycles""; ""Impact After No-Load Thermal Cycling""; ""Tension Subsequent to the No-Load Thermal Cycling and Impact""
Control code
SPR927296624
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9783319224435
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-22443-5
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
Label
Challenges in mechanics of time dependent materials : Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics, Volume 2, Bonnie Antoun, editor, (electronic book)
Publication
Antecedent source
unknown
Bibliography note
""References""""Chapter 5: Interaction of Shock Wave with Granular Materials""; ""5.1 Introduction""; ""5.2 Experimental Aspects""; ""5.3 Results and Discussion""; ""5.4 Conclusion""; ""References""; ""Chapter 6: Characterisation of Viscoelastic Material Properties During Curing Processes""; ""6.1 Introduction""; ""6.2 Method""; ""6.2.1 Material""; ""6.2.2 Cure Kinetics""; ""6.2.3 Viscoelastic Characterisation""; ""6.3 Results and Analysis""; ""6.3.1 DSC""; ""6.3.2 DMTA""; ""6.4 Discussion and Concluding Remarks""; ""References""
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • ""Preface""; ""Contents""; ""Chapter 1: Thermal Degradation of Extension Springs""; ""1.1 Introduction""; ""1.2 Experimental Procedures""; ""1.3 Results""; ""1.4 Summary""; ""Reference""; ""Chapter 2: Effect of Applied Temperature and Strain Rate on Laser Welded Stainless Steel Structures""; ""2.1 Material""; ""2.2 Tensile Specimen Geometry""; ""2.3 Wedge Specimen Geometry""; ""2.4 Weld Penetration Depth Quantification""; ""2.5 Experimental Results: Tensile Characterization""; ""2.6 Experimental Results: Wedge Specimens Loaded in Bending/Shear and Tension""; ""2.7 Summary""; ""References""
  • ""Chapter 3: Process Modeling and Experiments for Forging and Welding""""3.1 Introduction""; ""3.2 Material Model""; ""3.3 Experiments and Simulations""; ""3.3.1 Forging""; ""3.3.2 Welding""; ""3.3.3 Measurements of Recrystallized Volume Fraction and Hardness""; ""3.4 Results""; ""3.5 Conclusions""; ""References""; ""Chapter 4: Time-Dependent Viscoplastic Model for Dislocation Generation During the Cooling Process in the Silicon Ingot""; ""4.1 Introduction""; ""4.2 3 Dimensional Time-Dependent Haasen-Sumino Viscoplastic Model""; ""4.3 Results and Discussion""; ""4.4 Conclusions""
  • ""Chapter 7: Structure-Property Relationships in Bimodal Polyethylene from Indentation Measurements""""7.1 Introduction""; ""7.2 Experimental Details ""; ""7.3 Results and Discussions""; ""7.4 Conclusion""; ""References""; ""Chapter 8: Prediction Validation of Thermal Aging Performance of Military Composite Bridges""; ""8.1 Introduction""; ""8.2 Composite System""; ""8.3 Analysis Method""; ""8.4 Test and Simulation Procedures""; ""8.5 Test Specimens""; ""8.6 Simulation Models""; ""8.7 Test and Simulation Results""
  • ""8.7.1 Control: Mechanical Properties Prior to Thermal Cycling or UV Exposure""""8.7.2 No-Load Thermal Cycling and Subsequent Mechanical Loading""; ""No-Load Thermal Cycling (50 Cycles from -27.4 to 159.8 °F)""; "" Tension Subsequent to the No-Load Thermal Cycling""; "" Compression Subsequent to the No-Load Thermal Cycling""; "" Mechanical Fatigue Subsequent to the No-Load Thermal Cycling""; ""8.7.3 Impact and Post Impact Mechanical Properties After 50 No-Load Thermal Cycles""; ""Impact After No-Load Thermal Cycling""; ""Tension Subsequent to the No-Load Thermal Cycling and Impact""
Control code
SPR927296624
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9783319224435
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-22443-5
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote

Library Locations

Processing Feedback ...