Coverart for item
The Resource Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Volume 1, editors, U. Chandrasekhar, Lung-Jieh Yang and S. Gowthaman

Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Volume 1, editors, U. Chandrasekhar, Lung-Jieh Yang and S. Gowthaman

Label
Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Volume 1
Title
Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
Title number
Volume 1
Statement of responsibility
editors, U. Chandrasekhar, Lung-Jieh Yang and S. Gowthaman
Title variation
I-DAD 2018
Creator
Contributor
Editor
Subject
Genre
Language
eng
Member of
Cataloging source
N$T
Dewey number
620.0042
Index
index present
LC call number
TA174
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2018
http://bibfra.me/vocab/lite/meetingName
International Conference on Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Chandrasekhar, U.
  • Yang, Lung-Jieh
  • Gowthaman, S.
Series statement
Lecture Notes in Mechanical Engineering
http://library.link/vocab/subjectName
  • Engineering design
  • Aerospace engineering
  • Motor vehicles
Label
Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Volume 1, editors, U. Chandrasekhar, Lung-Jieh Yang and S. Gowthaman
Instantiates
Publication
Antecedent source
unknown
Bibliography note
Includes bibliographical references and index
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Intro; Preface; Contents; About the Editors; 1 Performance Analysis of Semi-active Suspension System Based on Suspension Working Space and Dynamic Tire Deflection; 1 Introduction; 2 Quarter Car Model; 2.1 Road Inputs; 2.1.1 Bump Input; 2.1.2 Sine Wave Input; 3 Control Strategies of Semi-active Suspension; 3.1 Skyhook Control; 3.2 Groundhook Control; 3.3 Hybrid Control; 3.4 Fuzzy Logic Control; 4 Simulation Results and Discussion; 5 Conclusion; Appendix; References; 2 Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al2O3/SiC Particles; 1 Introduction
  • 2 Experimental Set-up and Methodology2.1 Material Selection; 2.2 Fabrication of HMMCs by Stir Casting Process; 2.3 Density and Hardness; 2.4 Sand Abrasion Test Using Taguchi Technique; 2.4.1 Design of Experiment (DOE); 3 Results and Discussion; 3.1 Density and Vickers Hardness; 3.2 Three-Body Sand Abrasion Wear Test; 3.3 Effect of Composition and Revolutions on S/N Ratio; 4 Conclusions; References; 3 Development of Simulation Model for Effective Testing and Verification of Servo Vacuum Booster; 1 Introduction; 2 LabVIEW Simulation; 3 Result Analysis; 4 Conclusion; References
  • 4 Investigation of Relation Between Ignition Timing and Advance Angle to Improve Engine Performance1 Introduction; 2 System Description; 2.1 Mechanical Design; 2.2 Electrical Design; 2.3 PCB Development; 3 Algorithm; 4 Experimental Setup; 5 Algorithm for Spark Timing; 6 System Features; 6.1 Microcontroller Features; 6.2 Electrical Components List; 6.3 Control Panel; 7 Conclusion; References; 5 Experimental Investigation of Vapour Absorption Refrigeration Cycle for Automobile Cabin Cooling; 1 Introduction; 2 Literature Review; 3 System Description; 4 Results and Discussion; 5 Conclusions
  • 2 Experimental Method2.1 Materials; 2.2 Fabrication of Laminates; 3 Measurements; 3.1 Morphology; 3.2 Low Velocity Impact Test; 3.3 Dielectric Property; 4 Results and Discussion; 4.1 SEM Analysis; 4.2 Low Velocity Impact Test; 4.3 Dielectric Constant; 4.4 Dissipation Factor; 4.5 AC Conductivity; 5 Conclusion; Acknowledgements; References; 8 Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions; 1 Introduction; 2 Solution Methodology; 3 Vaporization: Without Droplet Dynamics; 3.1 Numerical Methodology
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9789811326967
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • on1079055257
  • (OCoLC)1079055257
Label
Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), Volume 1, editors, U. Chandrasekhar, Lung-Jieh Yang and S. Gowthaman
Publication
Antecedent source
unknown
Bibliography note
Includes bibliographical references and index
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Intro; Preface; Contents; About the Editors; 1 Performance Analysis of Semi-active Suspension System Based on Suspension Working Space and Dynamic Tire Deflection; 1 Introduction; 2 Quarter Car Model; 2.1 Road Inputs; 2.1.1 Bump Input; 2.1.2 Sine Wave Input; 3 Control Strategies of Semi-active Suspension; 3.1 Skyhook Control; 3.2 Groundhook Control; 3.3 Hybrid Control; 3.4 Fuzzy Logic Control; 4 Simulation Results and Discussion; 5 Conclusion; Appendix; References; 2 Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al2O3/SiC Particles; 1 Introduction
  • 2 Experimental Set-up and Methodology2.1 Material Selection; 2.2 Fabrication of HMMCs by Stir Casting Process; 2.3 Density and Hardness; 2.4 Sand Abrasion Test Using Taguchi Technique; 2.4.1 Design of Experiment (DOE); 3 Results and Discussion; 3.1 Density and Vickers Hardness; 3.2 Three-Body Sand Abrasion Wear Test; 3.3 Effect of Composition and Revolutions on S/N Ratio; 4 Conclusions; References; 3 Development of Simulation Model for Effective Testing and Verification of Servo Vacuum Booster; 1 Introduction; 2 LabVIEW Simulation; 3 Result Analysis; 4 Conclusion; References
  • 4 Investigation of Relation Between Ignition Timing and Advance Angle to Improve Engine Performance1 Introduction; 2 System Description; 2.1 Mechanical Design; 2.2 Electrical Design; 2.3 PCB Development; 3 Algorithm; 4 Experimental Setup; 5 Algorithm for Spark Timing; 6 System Features; 6.1 Microcontroller Features; 6.2 Electrical Components List; 6.3 Control Panel; 7 Conclusion; References; 5 Experimental Investigation of Vapour Absorption Refrigeration Cycle for Automobile Cabin Cooling; 1 Introduction; 2 Literature Review; 3 System Description; 4 Results and Discussion; 5 Conclusions
  • 2 Experimental Method2.1 Materials; 2.2 Fabrication of Laminates; 3 Measurements; 3.1 Morphology; 3.2 Low Velocity Impact Test; 3.3 Dielectric Property; 4 Results and Discussion; 4.1 SEM Analysis; 4.2 Low Velocity Impact Test; 4.3 Dielectric Constant; 4.4 Dissipation Factor; 4.5 AC Conductivity; 5 Conclusion; Acknowledgements; References; 8 Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions; 1 Introduction; 2 Solution Methodology; 3 Vaporization: Without Droplet Dynamics; 3.1 Numerical Methodology
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9789811326967
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • on1079055257
  • (OCoLC)1079055257

Library Locations

Processing Feedback ...