Coverart for item
The Resource Innovative design and development practices in aerospace and automotive engineering : I-DAD, February 22-24, 2016, Ram P. Bajpai, U. Chandrasekhar, editors

Innovative design and development practices in aerospace and automotive engineering : I-DAD, February 22-24, 2016, Ram P. Bajpai, U. Chandrasekhar, editors

Label
Innovative design and development practices in aerospace and automotive engineering : I-DAD, February 22-24, 2016
Title
Innovative design and development practices in aerospace and automotive engineering
Title remainder
I-DAD, February 22-24, 2016
Statement of responsibility
Ram P. Bajpai, U. Chandrasekhar, editors
Title variation
I-DAD 2016
Creator
Contributor
Editor
Subject
Genre
Language
eng
Member of
Cataloging source
GW5XE
Dewey number
620/.0042
Illustrations
illustrations
Index
index present
LC call number
TA174
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2016
http://bibfra.me/vocab/lite/meetingName
International Conference on Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering
Nature of contents
dictionaries
http://library.link/vocab/relatedWorkOrContributorName
  • Bajpai, Ram P.
  • Chandrasekhar, U.
Series statement
Lecture notes in mechanical engineering,
http://library.link/vocab/subjectName
  • Engineering design
  • Aerospace engineering
  • Motor vehicles
Label
Innovative design and development practices in aerospace and automotive engineering : I-DAD, February 22-24, 2016, Ram P. Bajpai, U. Chandrasekhar, editors
Instantiates
Publication
Copyright
Note
Includes author index
Antecedent source
unknown
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Preface; Logos of Organizers; Organizer; Knowledge Partners; Organizing Committee; International Advisory and Technical Committee; Contents; About the Editors; 1 Promising Configurations for Future Passenger Aircraft; Abstract; 2 Ultrasonic Material Characterization and Testing of Anisotropic Components; Abstract; 3 Measurement of Some Special Parameters of Engines; Abstract; 4 The Wind Tunnel Test and Unsteady CFD of an Ornithopter Formation; Abstract; 1 Introduction; 2 Tethered Flight Test; 3 Wind Tunnel Test; 4 Unsteady CFD (Computational Fluid Dynamics) for Two-Ornithopter Formation
  • 5 ConclusionsReferences; 5 Strategies for Better Fuel Economy, Light Weighting, and Friction Reduction in Cylinder Components of IC Engines; Abstract; 6 Fatigue and Fracture Reliability of Additively Manufactured Al-4047 and Ti-6Al-4V Alloys for Automotive and Aerospace Applications; Abstract; 1 Introduction; 2 Experimental Methodology; 3 Results and Discussions; 4 Conclusions and Outlook; Acknowledgments; References; 7 Recent Advances in High Temperature Structural Integrity; Abstract; 8 Future Technology Scenarios for Urban Mobility in India; Abstract
  • 9 Wiring the Tin-Silver-Copper Alloy by Fused Deposition ModelingAbstract; 1 Introduction; 2 Methodology; 3 Results and Discussion; 4 Conclusions; Acknowledgments; References; 10 Design and Study of Aerodynamics of Wind-Solar Hybrid System for Domestic Application by Using Balsa Wood; Abstract; 1 Introduction; 2 Literature Survey; 3 Wind System Design; 4 Design of the System; 5 Conclusion; References; 11 An Automated System for Motioning the Cargo for Ground and Air Operations; Abstract; 1 Introduction; 2 Conceptual Design of the Automated System
  • 3 Operation of the Automated Cargo Motioning System4 Force Analysis of the Automated System; 5 Conclusions and Suggestions for Improvement; Acknowledgments; References; 12 Analytical Studies on TIG Welding of TI-6AL-4V Alloy Plates Using CAE; Abstract; 1 Introduction; 2 RLV-TD-Elevon Assembly; 3 Elevon Assembly and Its Realization; 4 Scope of the Project; 5 Results and Discussion; 6 Conclusion; References; 13 Shape Parameterization of Airfoil Shapes Using Bezier Curves; Abstract; 1 Introduction; 2 Bezier Curves; 2.1 Matrix Representation of Bezier Curves
  • 2.2 Bezier Curve Representation of Airfoil Surface3 Algorithm; 4 Results; 5 Conclusion; References; 14 Flow Configuration Influence on Darcian and Forchheimer Permeabilities Determination; Abstract; 1 Introduction; 2 Materials and Methods; 2.1 Test Methodology for Permeation; 2.2 Method for Determining Darcian's and Forchheimer's Permeabilities; 3 Results and Discussion; 4 Conclusion; References; 15 An Experimental Study on Flow of Micronized Silicon Carbide Particles Through Sintered Porous Materials; Abstract; 1 Introduction; 2 Experimental Setup; 3 Results and Discussion; 4 Conclusion
Dimensions
unknown
Extent
1 online resource (xx, 607 pages)
File format
unknown
Form of item
online
Isbn
9789811017711
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other control number
10.1007/978-981-10-1771-1
Other physical details
illustrations.
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
ocn958933837
Label
Innovative design and development practices in aerospace and automotive engineering : I-DAD, February 22-24, 2016, Ram P. Bajpai, U. Chandrasekhar, editors
Publication
Copyright
Note
Includes author index
Antecedent source
unknown
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Preface; Logos of Organizers; Organizer; Knowledge Partners; Organizing Committee; International Advisory and Technical Committee; Contents; About the Editors; 1 Promising Configurations for Future Passenger Aircraft; Abstract; 2 Ultrasonic Material Characterization and Testing of Anisotropic Components; Abstract; 3 Measurement of Some Special Parameters of Engines; Abstract; 4 The Wind Tunnel Test and Unsteady CFD of an Ornithopter Formation; Abstract; 1 Introduction; 2 Tethered Flight Test; 3 Wind Tunnel Test; 4 Unsteady CFD (Computational Fluid Dynamics) for Two-Ornithopter Formation
  • 5 ConclusionsReferences; 5 Strategies for Better Fuel Economy, Light Weighting, and Friction Reduction in Cylinder Components of IC Engines; Abstract; 6 Fatigue and Fracture Reliability of Additively Manufactured Al-4047 and Ti-6Al-4V Alloys for Automotive and Aerospace Applications; Abstract; 1 Introduction; 2 Experimental Methodology; 3 Results and Discussions; 4 Conclusions and Outlook; Acknowledgments; References; 7 Recent Advances in High Temperature Structural Integrity; Abstract; 8 Future Technology Scenarios for Urban Mobility in India; Abstract
  • 9 Wiring the Tin-Silver-Copper Alloy by Fused Deposition ModelingAbstract; 1 Introduction; 2 Methodology; 3 Results and Discussion; 4 Conclusions; Acknowledgments; References; 10 Design and Study of Aerodynamics of Wind-Solar Hybrid System for Domestic Application by Using Balsa Wood; Abstract; 1 Introduction; 2 Literature Survey; 3 Wind System Design; 4 Design of the System; 5 Conclusion; References; 11 An Automated System for Motioning the Cargo for Ground and Air Operations; Abstract; 1 Introduction; 2 Conceptual Design of the Automated System
  • 3 Operation of the Automated Cargo Motioning System4 Force Analysis of the Automated System; 5 Conclusions and Suggestions for Improvement; Acknowledgments; References; 12 Analytical Studies on TIG Welding of TI-6AL-4V Alloy Plates Using CAE; Abstract; 1 Introduction; 2 RLV-TD-Elevon Assembly; 3 Elevon Assembly and Its Realization; 4 Scope of the Project; 5 Results and Discussion; 6 Conclusion; References; 13 Shape Parameterization of Airfoil Shapes Using Bezier Curves; Abstract; 1 Introduction; 2 Bezier Curves; 2.1 Matrix Representation of Bezier Curves
  • 2.2 Bezier Curve Representation of Airfoil Surface3 Algorithm; 4 Results; 5 Conclusion; References; 14 Flow Configuration Influence on Darcian and Forchheimer Permeabilities Determination; Abstract; 1 Introduction; 2 Materials and Methods; 2.1 Test Methodology for Permeation; 2.2 Method for Determining Darcian's and Forchheimer's Permeabilities; 3 Results and Discussion; 4 Conclusion; References; 15 An Experimental Study on Flow of Micronized Silicon Carbide Particles Through Sintered Porous Materials; Abstract; 1 Introduction; 2 Experimental Setup; 3 Results and Discussion; 4 Conclusion
Dimensions
unknown
Extent
1 online resource (xx, 607 pages)
File format
unknown
Form of item
online
Isbn
9789811017711
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other control number
10.1007/978-981-10-1771-1
Other physical details
illustrations.
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
ocn958933837

Library Locations

Processing Feedback ...