Coverart for item
The Resource Mechanics of additive and advanced manufacturing : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 9, Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre, editors

Mechanics of additive and advanced manufacturing : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 9, Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre, editors

Label
Mechanics of additive and advanced manufacturing : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 9
Title
Mechanics of additive and advanced manufacturing
Title remainder
proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics
Title number
Volume 9
Statement of responsibility
Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre, editors
Title variation
SEM 2017
Creator
Contributor
Editor
Subject
Genre
Language
eng
Summary
Mechanics of Additive and Advanced Manufacturing, Volume 9 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the ninth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies, including: Design, Optimization Experiments Computations Materials for Advanced Manufacturing Processes (3D printing, micro- and nano-manufacturing, powder bed fusion, directed energy deposition, etc.) Mechanics Aspects of Advanced Manufacturing (e.g. mechanical properties, residual stress, deformation, failure, rate-dependent mechanical behavior, etc.)
Member of
Cataloging source
N$T
Dewey number
620.1/1
Index
no index present
LC call number
TA403.6
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2017
http://bibfra.me/vocab/lite/meetingName
SEM Conference & Exposition on Experimental and Applied Mechanics
Nature of contents
dictionaries
http://library.link/vocab/relatedWorkOrContributorName
  • Wang, Junlan
  • Antoun, Bonnie
  • Brown, Eric
  • Chen, Weinong
  • Chasiotis, Ioannis
  • Huskins-Retzlaff, Emily
  • Kramer, Sharlotte
  • Thakre, Piyush R.
Series statement
Conference proceedings of the Society for Experimental Mechanics Series,
http://library.link/vocab/subjectName
  • Materials
  • Manufacturing processes
Label
Mechanics of additive and advanced manufacturing : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 9, Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre, editors
Instantiates
Publication
Copyright
Note
International conference proceedings
Antecedent source
unknown
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
Chapter 1. Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials -- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction -- Chapter 3. Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material -- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool -- Chapter 5. Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing -- Chapter 6. Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing -- Chapter 7. Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes -- Chapter 8. Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys -- Chapter 9. Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties -- Chapter 10. ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components -- Chapter 11. Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding -- Chapter 12. Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing -- Chapter 13. Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing -- Chapter 14. The Effect of the 3-D Printing Process on the Mechanical Properties of Materials -- Chapter 15. Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication
Control code
SPR1005978622
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9783319628349
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-62834-9
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • on1005978622
  • (OCoLC)1005978622
Label
Mechanics of additive and advanced manufacturing : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 9, Junlan Wang, Bonnie Antoun, Eric Brown, Weinong Chen, Ioannis Chasiotis, Emily Huskins-Retzlaff, Sharlotte Kramer, Piyush R. Thakre, editors
Publication
Copyright
Note
International conference proceedings
Antecedent source
unknown
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
Chapter 1. Fracture Properties of Additively Manufactured Acrylonitrile-Butadiene-Styrene Materials -- Chapter 2.Complex Modulus Variation by Manipulation of Mechanical Test Method and Print Direction -- Chapter 3. Piezoelectric Inkjet Printing as a Method for the Selective Deposition of Energetic Material -- Chapter 4.A New Heat Transfer Simulation Model for Selective Laser Melting to Estimate the Geometry of Cross Section of Melt Pool -- Chapter 5. Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-based Additive Manufacturing -- Chapter 6. Strain Energy Dissipation Mechanisms in Carbon Nanotube Composites Fabricated by Additive Manufacturing -- Chapter 7. Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes -- Chapter 8. Effect of Heat Treatment on Friction Stir Welded Dissimilar Titanium Alloys -- Chapter 9. Effect of Porosity on Thermal Performance of Plastic Injection Molds Based on Experimental and Numerically Derived Material Properties -- Chapter 10. ODS Coating Development Using DED Additive Manufacturing for High Temperature Turbine Components -- Chapter 11. Processing and Characterization of Ti64/AZ31 Multilayered Structure by Roll Bonding -- Chapter 12. Vibration Characteristics of Unit Cell Structures fabricated by Multi-Material Additive Manufacturing -- Chapter 13. Defects, Process Parameters and Signatures for Online Monitoring and Control in Powder-based Additive Manufacturing -- Chapter 14. The Effect of the 3-D Printing Process on the Mechanical Properties of Materials -- Chapter 15. Tool Wear Mechanisms of Phyisical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication
Control code
SPR1005978622
Dimensions
unknown
Extent
1 online resource.
File format
unknown
Form of item
online
Isbn
9783319628349
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-62834-9
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • on1005978622
  • (OCoLC)1005978622

Library Locations

Processing Feedback ...