Coverart for item
The Resource Mechanics of composite and multi-functional materials : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 6, Piyush R Thakre, Raman Singh, Geoff Slipher, editors

Mechanics of composite and multi-functional materials : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 6, Piyush R Thakre, Raman Singh, Geoff Slipher, editors

Label
Mechanics of composite and multi-functional materials : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 6
Title
Mechanics of composite and multi-functional materials
Title remainder
proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics
Title number
Volume 6
Statement of responsibility
Piyush R Thakre, Raman Singh, Geoff Slipher, editors
Creator
Contributor
Subject
Genre
Language
eng
Summary
Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 6 of the Proceedings of the 2017 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Nano & Particulate Composites Recycled Constituent Composites Hybrid Composites Multifunctional Materials Fracture & Fatigue of Composites Novel Developments in Composites Mechanics of Composites
Member of
Cataloging source
EBLCP
Dewey number
620.1/1892
Index
no index present
LC call number
TA418.9.C6
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2017
http://bibfra.me/vocab/lite/meetingName
Annual Conference on Experimental and Applied Mechanics
Nature of contents
dictionaries
http://library.link/vocab/relatedWorkOrContributorName
  • Thakre, Piyush R
  • Singh, Raman
  • Slipher, Geoff
Series statement
Conference Proceedings of the Society for Experimental Mechanics Series
http://library.link/vocab/subjectName
Composite materials
Label
Mechanics of composite and multi-functional materials : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 6, Piyush R Thakre, Raman Singh, Geoff Slipher, editors
Instantiates
Publication
Note
""5.3.1 Microstructure Evaluation and Macro Indentation Compression Tests""
Antecedent source
unknown
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • ""FM""; ""Chapter 1: Scrap-Rubber Based Composites Reinforced with Boron and Alumina""; ""1.1 Introduction""; ""1.2 Experimental Conditions""; ""1.2.1 Materials Processing""; ""1.2.2 Mechanical Tests and Microstructure of the Compositions""; ""1.2.3 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter""; ""1.2.4 Nanoindentation to Measure Constituent Properties""; ""1.3 Results and Discussions""; ""1.3.1 Dynamic Compression (Impact) Testing""; ""1.3.2 Wear Testing""; ""1.3.3 Nanoindentation""; ""1.4 Conclusions""; ""References""
  • ""Chapter 2: Characterization of Thermoplastic Matrix Composite Joints for the Development of a Computational Framework""""2.1 Introduction""; ""2.2 Mechanical Characterization of Composite Material""; ""2.3 Optical Characterization of Composite Material""; ""2.4 Conclusions""; ""2.5 Future Work""; ""References""; ""Chapter 3: Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) Based Composites Designed Through Combine ... ""; ""3.1 Introduction""; ""3.2 Experimental Conditions""
  • ""3.2.1 Manufacturing of Intermetallic Composite: Composition of the Specimens Designed in this Work Was Arranged as Follows""""3.2.2 Wearing-Scratch Tests""; ""3.2.3 Laser Cutting Process and Cutting Parameters""; ""3.3 Results and Discussions""; ""3.3.1 Microstructural Evaluation of the Intermetallic Composite""; ""3.3.2 Evaluation of Surface Wearing by Scratch Test Results""; ""3.3.3 Evaluation of the Results of Laser Cutting Process""; ""3.3.4 Integrity of Surface After Laser Cutting""; ""3.4 Conclusions""; ""References""
  • ""Chapter 4: Mechanical Characterization of Epoxy: Scrap Rubber Based Composites Reinforced with Nanoparticles""""4.1 Introduction""; ""4.2 Experimental Conditions""; ""4.2.1 Materials Processing""; ""4.2.2 Mechanical Behaviours and Microstructural Analyses""; ""4.2.3 Creep and Wear Analyses Through Nanoindentation Tests""; ""4.2.4 Damage Analysis by Means of Macro Scratch Test""; ""4.3 Results and Discussions""; ""4.3.1 Microstructure Analyses and Macro Indentation Compression Tests""; ""4.3.2 Dynamic Compression (Impact) Testing""; ""4.3.3 Creep Testing by Nanoindentation""
  • ""4.3.4 Wear Testing by Nanoindentation""""4.3.5 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter""; ""4.4 Conclusions""; ""References""; ""Chapter 5: Mechanical Characterization of Epoxy -- Scrap Rubber Based Composites Reinforced with Nano Graphene""; ""5.1 Introduction""; ""5.2 Experimental Conditions""; ""5.2.1 Materials Processing""; ""5.2.2 Mechanical Tests and Microstructural Analyses""; ""5.2.3 Nanoindentation: Creep and Wear Tests""; ""5.2.4 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter""; ""5.3 Results and Discussion""
Control code
SPR1012343047
Dimensions
unknown
Extent
1 online resource (219 pages).
File format
unknown
Form of item
online
Isbn
9783319634074
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-63408-1
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • on1012343047
  • (OCoLC)1012343047
Label
Mechanics of composite and multi-functional materials : proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics, Volume 6, Piyush R Thakre, Raman Singh, Geoff Slipher, editors
Publication
Note
""5.3.1 Microstructure Evaluation and Macro Indentation Compression Tests""
Antecedent source
unknown
Carrier category
online resource
Carrier category code
cr
Carrier MARC source
rdacarrier
Color
multicolored
Content category
text
Content type code
txt
Content type MARC source
rdacontent
Contents
  • ""FM""; ""Chapter 1: Scrap-Rubber Based Composites Reinforced with Boron and Alumina""; ""1.1 Introduction""; ""1.2 Experimental Conditions""; ""1.2.1 Materials Processing""; ""1.2.2 Mechanical Tests and Microstructure of the Compositions""; ""1.2.3 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter""; ""1.2.4 Nanoindentation to Measure Constituent Properties""; ""1.3 Results and Discussions""; ""1.3.1 Dynamic Compression (Impact) Testing""; ""1.3.2 Wear Testing""; ""1.3.3 Nanoindentation""; ""1.4 Conclusions""; ""References""
  • ""Chapter 2: Characterization of Thermoplastic Matrix Composite Joints for the Development of a Computational Framework""""2.1 Introduction""; ""2.2 Mechanical Characterization of Composite Material""; ""2.3 Optical Characterization of Composite Material""; ""2.4 Conclusions""; ""2.5 Future Work""; ""References""; ""Chapter 3: Experimental Study of Laser Cutting Process of Titanium Aluminium (Ti-Al) Based Composites Designed Through Combine ... ""; ""3.1 Introduction""; ""3.2 Experimental Conditions""
  • ""3.2.1 Manufacturing of Intermetallic Composite: Composition of the Specimens Designed in this Work Was Arranged as Follows""""3.2.2 Wearing-Scratch Tests""; ""3.2.3 Laser Cutting Process and Cutting Parameters""; ""3.3 Results and Discussions""; ""3.3.1 Microstructural Evaluation of the Intermetallic Composite""; ""3.3.2 Evaluation of Surface Wearing by Scratch Test Results""; ""3.3.3 Evaluation of the Results of Laser Cutting Process""; ""3.3.4 Integrity of Surface After Laser Cutting""; ""3.4 Conclusions""; ""References""
  • ""Chapter 4: Mechanical Characterization of Epoxy: Scrap Rubber Based Composites Reinforced with Nanoparticles""""4.1 Introduction""; ""4.2 Experimental Conditions""; ""4.2.1 Materials Processing""; ""4.2.2 Mechanical Behaviours and Microstructural Analyses""; ""4.2.3 Creep and Wear Analyses Through Nanoindentation Tests""; ""4.2.4 Damage Analysis by Means of Macro Scratch Test""; ""4.3 Results and Discussions""; ""4.3.1 Microstructure Analyses and Macro Indentation Compression Tests""; ""4.3.2 Dynamic Compression (Impact) Testing""; ""4.3.3 Creep Testing by Nanoindentation""
  • ""4.3.4 Wear Testing by Nanoindentation""""4.3.5 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter""; ""4.4 Conclusions""; ""References""; ""Chapter 5: Mechanical Characterization of Epoxy -- Scrap Rubber Based Composites Reinforced with Nano Graphene""; ""5.1 Introduction""; ""5.2 Experimental Conditions""; ""5.2.1 Materials Processing""; ""5.2.2 Mechanical Tests and Microstructural Analyses""; ""5.2.3 Nanoindentation: Creep and Wear Tests""; ""5.2.4 Damage Analysis by Means of Scratch Test and 3D Optical Roughness Meter""; ""5.3 Results and Discussion""
Control code
SPR1012343047
Dimensions
unknown
Extent
1 online resource (219 pages).
File format
unknown
Form of item
online
Isbn
9783319634074
Level of compression
unknown
Media category
computer
Media MARC source
rdamedia
Media type code
c
Other control number
10.1007/978-3-319-63408-1
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
  • on1012343047
  • (OCoLC)1012343047

Library Locations

Processing Feedback ...