Coverart for item
The Resource Microfabrication and precision engineering : research and development, edited by J. Paulo Davim

Microfabrication and precision engineering : research and development, edited by J. Paulo Davim

Label
Microfabrication and precision engineering : research and development
Title
Microfabrication and precision engineering
Title remainder
research and development
Statement of responsibility
edited by J. Paulo Davim
Contributor
Editor
Subject
Language
eng
Member of
Cataloging source
UMI
Dewey number
620.0045
Illustrations
illustrations
LC call number
TS176
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
Davim, J. Paulo
Series statement
Woodhead Publishing Reviews: Mechanical Engineering Series
http://library.link/vocab/subjectName
  • Production engineering
  • Microtechnology
  • Nanotechnology
Label
Microfabrication and precision engineering : research and development, edited by J. Paulo Davim
Instantiates
Publication
Copyright
Bibliography note
Includes bibliographical references and index
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Front Cover; Microfabrication and Precision Engineering; Copyright Page; Contents; List of contributors; About the editor; Preface; 1 Modeling of micro- and nano-scale cutting; 1.1 Introduction; 1.2 Modeling of microscale cutting; 1.2.1 Minimum chip thickness and size effect; 1.2.2 FEM modeling of microscale cutting; 1.2.3 FEM basics; 1.2.4 FEM cutting models; 1.2.5 Friction modeling; 1.2.6 Material modeling; 1.3 Modeling of nanoscale cutting; 1.3.1 Model geometry and material microstructure; 1.3.2 Potential function; 1.3.3 Boundary conditions and input parameters
  • 1.3.4 Numerical integration and equilibrationConclusions; References; 2 Machining scale: workpiece grain size and surface integrity in micro end milling; 2.1 Introduction; 2.2 Specific cutting energy; 2.3 Size effect; 2.4 Workpiece microstructure scale; 2.5 Surface integrity; 2.5.1 Burr formation; 2.5.2 Chip formation; 2.5.3 Roughness; 2.5.4 Microhardness; 2.5.5 Microstructural damages; 2.5.6 Size effect; References; 3 Micromachining technique based on the orbital motion of the diamond tip; 3.1 Introduction; 3.2 Principle of micromachining using the orbital motion of the diamond tip
  • 3.3 Micromachining setup and test of the stage's trajectory3.3.1 Establishment of the micromachining setup and the machining procedure; 3.3.2 Test of the trajectory of the nanopiezo stage in the orbital motion; 3.4 Micromachining mechanism using the orbital motion of the tip; 3.4.1 Comparison of chip states with the conical and pyramidal tips; 3.4.2 Difference between the micromilling process and this technique; 3.4.3 Determination of the uncut chip thickness and the cutting rake angle; 3.5 Formation mechanism and control methods of burrs
  • 3.5.1 Burr formation during machining with the conical tip3.5.2 Burr formation during machining with the pyramidal tip; 3.5.3 Methods of formation of slight burrs; 3.6 Effects of the processing parameters and fabrication of microstructures; 3.6.1 Effects of the processing parameters on machining microchannels; 3.6.2 Effect of the feed on machining microstructures; 3.6.3 Fabrication of typical microstructures; 3.7 Summary and future works; Acknowledgments; References; 4 Microelectrical discharge machining of Ti-6Al-4V: implementation of innovative machining strategies; 4.1 Introduction
  • 4.2 Principle of electrical discharge machining4.3 Overview of micro-EDM; 4.4 Differences between EDM and micro-EDM; 4.5 System components of micro-EDM; 4.5.1 Pulse generator; 4.5.2 Servo control unit; 4.5.3 Dielectric circulating unit; 4.6 Micro-EDM process parameters; 4.6.1 Electrical process parameters; 4.6.1.1 Discharge energy; 4.6.1.2 Gap and discharge voltage; 4.6.1.3 Peak current; 4.6.1.4 Pulse duration; 4.6.1.5 Duty factor; 4.6.1.6 Pulse frequency; 4.6.1.7 Polarity; 4.6.2 Nonelectrical process parameters; 4.6.2.1 Tool electrodes; 4.6.2.2 Workpiece materials; 4.6.2.3 Dielectric fluids
Dimensions
unknown
Extent
1 online resource (1 volume)
Form of item
online
Isbn
9780857094865
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other physical details
illustrations
Sound
unknown sound
Specific material designation
remote
Label
Microfabrication and precision engineering : research and development, edited by J. Paulo Davim
Publication
Copyright
Bibliography note
Includes bibliographical references and index
Carrier category
online resource
Carrier category code
  • cr
Carrier MARC source
rdacarrier
Content category
text
Content type code
  • txt
Content type MARC source
rdacontent
Contents
  • Front Cover; Microfabrication and Precision Engineering; Copyright Page; Contents; List of contributors; About the editor; Preface; 1 Modeling of micro- and nano-scale cutting; 1.1 Introduction; 1.2 Modeling of microscale cutting; 1.2.1 Minimum chip thickness and size effect; 1.2.2 FEM modeling of microscale cutting; 1.2.3 FEM basics; 1.2.4 FEM cutting models; 1.2.5 Friction modeling; 1.2.6 Material modeling; 1.3 Modeling of nanoscale cutting; 1.3.1 Model geometry and material microstructure; 1.3.2 Potential function; 1.3.3 Boundary conditions and input parameters
  • 1.3.4 Numerical integration and equilibrationConclusions; References; 2 Machining scale: workpiece grain size and surface integrity in micro end milling; 2.1 Introduction; 2.2 Specific cutting energy; 2.3 Size effect; 2.4 Workpiece microstructure scale; 2.5 Surface integrity; 2.5.1 Burr formation; 2.5.2 Chip formation; 2.5.3 Roughness; 2.5.4 Microhardness; 2.5.5 Microstructural damages; 2.5.6 Size effect; References; 3 Micromachining technique based on the orbital motion of the diamond tip; 3.1 Introduction; 3.2 Principle of micromachining using the orbital motion of the diamond tip
  • 3.3 Micromachining setup and test of the stage's trajectory3.3.1 Establishment of the micromachining setup and the machining procedure; 3.3.2 Test of the trajectory of the nanopiezo stage in the orbital motion; 3.4 Micromachining mechanism using the orbital motion of the tip; 3.4.1 Comparison of chip states with the conical and pyramidal tips; 3.4.2 Difference between the micromilling process and this technique; 3.4.3 Determination of the uncut chip thickness and the cutting rake angle; 3.5 Formation mechanism and control methods of burrs
  • 3.5.1 Burr formation during machining with the conical tip3.5.2 Burr formation during machining with the pyramidal tip; 3.5.3 Methods of formation of slight burrs; 3.6 Effects of the processing parameters and fabrication of microstructures; 3.6.1 Effects of the processing parameters on machining microchannels; 3.6.2 Effect of the feed on machining microstructures; 3.6.3 Fabrication of typical microstructures; 3.7 Summary and future works; Acknowledgments; References; 4 Microelectrical discharge machining of Ti-6Al-4V: implementation of innovative machining strategies; 4.1 Introduction
  • 4.2 Principle of electrical discharge machining4.3 Overview of micro-EDM; 4.4 Differences between EDM and micro-EDM; 4.5 System components of micro-EDM; 4.5.1 Pulse generator; 4.5.2 Servo control unit; 4.5.3 Dielectric circulating unit; 4.6 Micro-EDM process parameters; 4.6.1 Electrical process parameters; 4.6.1.1 Discharge energy; 4.6.1.2 Gap and discharge voltage; 4.6.1.3 Peak current; 4.6.1.4 Pulse duration; 4.6.1.5 Duty factor; 4.6.1.6 Pulse frequency; 4.6.1.7 Polarity; 4.6.2 Nonelectrical process parameters; 4.6.2.1 Tool electrodes; 4.6.2.2 Workpiece materials; 4.6.2.3 Dielectric fluids
Dimensions
unknown
Extent
1 online resource (1 volume)
Form of item
online
Isbn
9780857094865
Media category
computer
Media MARC source
rdamedia
Media type code
  • c
Other physical details
illustrations
Sound
unknown sound
Specific material designation
remote

Library Locations

Processing Feedback ...