Online access with Eduserv subscription agreement: ASTM Standards & Engineering Digital Library

Resource Information

The series Online access with Eduserv subscription agreement: ASTM Standards & Engineering Digital Library represents a set of related resources, especially of a specified kind, found in University of Liverpool.

The Resource Online access with Eduserv subscription agreement: ASTM Standards & Engineering Digital Library

Label: Online access with Eduserv subscription agreement: ASTM Standards & Engineering Digital Library

A sample of Items in the Series Online access with Eduserv subscription agreement: ASTM Standards & Engineering Digital Library See All

1952 and 1953 Supplements to the bibliography and abstracts on electrical contacts, prepared by committee B-4 on Electrical Heating, Resistance, and Related Alloys of the American Society for Testing and Materials, (electronic book)

Borrow it

1954 Supplement to the metal cleaning bibliographical abstracts, prepared by Jay C. Harris, (electronic book)

Borrow it

1954 supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Electrical Heating, Electrical Resistance, and Electrical Contacts of the American Society for Testing Materials, (electronic book)

Borrow it

1955 Supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Electrical Heating, Electrical Resistance, and Electrical Contacts of the American Society for Testing and Materials, (electronic book)

Borrow it

1956 References on fatigue, sponsored by ASTM Committee E-9 on Fatigue, (electronic book)

Borrow it

1956 Supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Electrical Heating, Electrical Resistance, and Electrical Contacts of the American Society for Testing Materials, (electronic book)

Borrow it

1957 Supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Electrical Heating, Electrical Resistance, and Electrical Contacts of the American Society for Testing Materials, (electronic book)

Borrow it

1957 references on fatigue, sponsored by ASTM Committee E-9 on Fatigue, (electronic book)

Borrow it

1957 references on fatigue, sponsored by ASTM Committee E-9 on Fatigue, (electronic book)

Borrow it

1957 supplement to the metal cleaning bibliographical abstracts, prepared by Jay C. Harris, (electronic book)

Borrow it

1958 supplement to the Bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Electrical Heating, Electrical Resistance, and Electrical Contacts of the American Society for Testing and Materials, (electronic book)

Borrow it

1958 symposium on bulk sampling : presented at the sixty-first annual meeting, American Society for Testing Materials, Boston, Mass., June 23, 1958, (electronic book)

Borrow it

1959 supplement bibliographical abstracts of methods for analysis of synthetic detergents 1933-1959, prepared by Jay C. Harris for Subcommittee T-2 of Committee D-12, (electronic book)

Borrow it

1959 supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Electrical Heating, Electrical Resistance, and Electrical Contacts of the American Society for Testing Materials, (electronic book)

Borrow it

1959 supplement to the bibliography of spectrophotometric methods of analysis for inorganic ions : covering analytical chemistry, the analyst, and analytica chimica acta for the period 1952-1958, prepared by M.G.Mellon and D. D. Bly, (electronic book)

Borrow it

1960 References on fatigue, prepared by Committee E-9 on Fatigue, (electronic book)

Borrow it

1960 Supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Thermostats and for Electrical Resistance, Heating, and Contacts of the American Society for Testing and Materials, (electronic book)

Borrow it

1960 supplement to the metal cleaning bibliographical abstracts, prepared by Jay C. Harris, (electronic book)

Borrow it

1961 Supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on metallic materials for thermostats and for, electrical resistance, heating and contacts of the American Society for Testing Materials, (electronic book)

Borrow it

1962 Supplement to the bibliography and abstracts on electrical contacts, prepared by Committee B-4 on Metallic Materials for Thermostats and for Electrical Resistance, Heating, and Contacts of the American Society for Testing and Materials, (electronic book)

Borrow it

1963 Supplement to the bibliography and abstracts on electrical contacts, circuit breakers and arc phenomena, prepared by Committee B-4 on Metallic Materials for Thermostats and for Electrical Resistance, Heating, and Contacts of the American Society for Testing and Materials, (electronic book)

Borrow it

1964 references on fatigue (with additional 1963 references), prepared by Committee E-9 on Fatigue, (electronic book)

Borrow it

A Guide for fatigue testing and the statistical analysis of fatigue data, prepared by Committee E-9 on Fatigue, American Society for Testing and Materials, 1963, (electronic book)

Borrow it

A Guide to the safe handling of hazardous materials accidents, (electronic book)

Borrow it

A Guide to the safe handling of hazardous materials accidents, a Special Supplement, "Initial Emergency AssessmentاInitial Response Action," can be found on ttie inside back cover, (electronic book)

Borrow it

A Manual on methods for retrieving and correlating technical data, prepared for the ASTM Special Committee on Numerical Reference Data by Freeman H. Dyke, Jr., Information Consultant, (electronic book)

Borrow it

A comprehensive review of lubricant chemistry, technology, selection, and design, Syed Q. A. Rizvi, Ph.D, (electronic book)

Borrow it

A manual for the chemical analysis of metals, Thomas R. Dulski, (electronic book)

Borrow it

ASTM manual for conducting an interlaboratory study of a test method, prepared by Committee E-11 on Quality Control of Materials, American Society for Testing and Materials, (electronic book)

Borrow it

ASTM manual on consumer sensory evaluation, sponsored by ASTM Committee E18 on Sensory Evaluation of Materials and Products, E. E. Schaefer, Johnson Wax, editor, (electronic book)

Borrow it

ASTM manual on fitting straight lines, prepared by Committee E-11 on Quality Control of Materials, American Society for Testing and Materials, (electronic book)

Borrow it

ASTM manual on quality control of materials, prepared by ASTM Committee E-11 on Quality Control of Materials, (electronic book)

Borrow it

ASTM manual on zirconium and hafnium, sponsored by ASTM Committee B-10 on Reactive and Refractory Metals and Alloys, American Society for Testing and Materials, J. H. Schemel, (electronic book)

Borrow it

ASTM standards and engineering digital library, (database)

Borrow it

ASTM viscosity index calculated from kinematic viscosity, (electronic book)

Borrow it

ASTM viscosity index calculated from kinematic viscosity, (electronic book)

Borrow it

ASTM viscosity tables for kinematic viscosity conversions and viscosity index calculations, (electronic book)

Borrow it

ASTM viscosity tables for kinematic viscosity conversions and viscosity index calculations, (electronic book)

Borrow it

ASTM's role in performance-based fire codes and standards, John R. Hall, editor, (electronic book)

Borrow it

Accelerated and outdoor durability testing of organic materials, Warren D. Ketola and Douglas Grossman, editors, (electronic book)

Borrow it

Access security screening : challenges and solutions, Theofolus P. Tsacoumis, editor, (electronic book)

Borrow it

Accreditation practices for inspections, tests, and laboratories, Harvey E. Schock, Jr., editor, (electronic book)

Borrow it

Achievement of high fatigue resistance in metals and alloys : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N. J., 22-27 June 1969, (electronic book)

Borrow it

Acoustic emission : current practice and future directions, Wolfgang Sachse, James Roget, and Kusuo Yamaguchi, editors, (electronic book)

Borrow it

Acoustic emission : standards and technology update, Sotirios J. Vahaviolos, editor, (electronic book)

Borrow it

Acoustic emission monitoring of pressurized systems, a symposium sponsored by ASTM Committee E07 on Nondestructive Testing, American Society for Testing and Materials, Ft. Lauderdale, Fla., 25-26 Jan., 1979, W. F. Hartman, Technology for Energy Corporation, and J. W. McElroy, Philadelphia Electric Company, editors, (electronic book)

Borrow it

Acoustic emission testing of aerial devices and associated equipment used in the utility industries, Allen H. Bingham, Calvin W. Ek, and Jerry R. Tanner, editors, (electronic book)

Borrow it

Acoustic emission, a symposium presented at the December Committee Week, American Society for Testing and Materials, Bel Harbour, Florida, 7-8 December 1971, R. G. Liptai, general chairman, D. O. Harris and C. A. Tatro, co-chairmen, (electronic book)

Borrow it

Acoustic emissions in geotechnical engineering practice, a symposium sponsored by ASTM Committee D-18 on Soil and Rock for Engineering Purposes, American Society for Testing and Materials, Detroit, Mich., 24 June 1981, V. P. Drnevich, University of Kentucky, R. E. Gray, GAI Consultants, Inc., editors, (electronic book)

Borrow it

Adhesion : presented at the sixty-sixth annual meeting, American Society for Testing and Materials, Atlantic City, N.J., June 26, 1963, (electronic book)

Borrow it

Adhesion measurement of thin films, thick films, and bulk coatings, a symposium presented at ASTM Headquarters, American Society for Testing and Materials, Philadelphia, Pa., 2-4 Nov. 1976, K. L. Mittal IBM Corporation East Fishkill Facility Hopewell Junction, N.Y. editor, (electronic book)

Borrow it

Adhesively bonded joints : testing, analysis, and design, W. S. Johnson, editor, (electronic book)

Borrow it

Advanced composite materials-environmental effects, a symposium sponsored by ASTM Committee D-30 on High Modulus Fibers and Their Composites, American Society for Testing and Materials, Dayton, Ohio, 29-30 Sept. 1977, J. R. Vinson, University of Delaware, editor, (electronic book)

Borrow it

Advanced testing techniques : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N. J., 22-27 June 1969, (electronic book)

Borrow it

Advanced triaxial testing of soil and rock, Robert T. Donaghe, Ronald C. Chaney, and Marshall L. Silver, editors, (electronic book)

Borrow it

Advances in adhesives, adhesion science, and testing, Dennis Damico, editor, (electronic book)

Borrow it

Advances in electrochemical techniques for corrosion monitoring and measurement, Sankara Papavinasam, Neal S. Berke, Sean Brossia, Editors, (electronic book)

Borrow it

Advances in electron metallography : a symposium presented at the sixty-eighth annual meeting, American Society for Testing and Materials, Lafayette, Ind., June 13-18, 1965, 6th volume, (electronic book)

Borrow it

Advances in environmental measurement methods for asbestos, Michael E. Beard and Harry L. Rook, editors, (electronic book)

Borrow it

Advances in fatigue crack closure measurement and analysis, Second volume, R. C. McClung and J. C. Newman, Jr., editors, (electronic book)

Borrow it

Advances in fatigue lifetime predictive techniques, 2nd volume, M. R. Mitchell and R. W. Landgraf, editors, (electronic book)

Borrow it

Advances in fatigue lifetime predictive techniques, 3rd volume, M. R. Mitchell and R. W. Landgraf editors, (electronic book)

Borrow it

Advances in fatigue lifetime predictive techniques, M. R. Mitchell and R. W. Landgraf, editors, (electronic book)

Borrow it

Advances in geosynthetic clay liner technology, 2nd Symposium, Robert E. Mackey and Kent von Maubeuge, editors, (electronic book)

Borrow it

Advances in luminescence spectroscopy, a symposium sponsored by ASTM Committee E-13 on Molecular Spectroscopy, Atlantic City, N.J., 7 March 1983 ; L.J. Cline Love, Seton Hall University and DeLyle Eastwood, U.S. Army C, (electronic book)

Borrow it

Advances in multiaxial fatigue, David L. McDowell and Rod Ellis, editors, (electronic book)

Borrow it

Advances in the production and use of steel with improved internal cleanlines, John K. Mahaney, Jr., editor, (electronic book)

Borrow it

Advances in the state of the art of fire testing, JAI guest editor, Arthur J. Parker, P.E, (electronic book)

Borrow it

Advances in the technology of stainless steels and related alloys, (electronic book)

Borrow it

Advances in thermoplastic matrix composite materials, Golam M. Newaz, editor, (electronic book)

Borrow it

Aggregate contribution to hot mix asphalt (HMA) performance, Thomas D. White, Sam R. Johnson, and John J. Yzenas, editors, (electronic book)

Borrow it

Air change rate and airtightness in buildings, M. H. Sherman, editor, (electronic book)

Borrow it

Air quality and comfort in airliner cabins, Niren L. Nagda, editor, (electronic book)

Borrow it

Air quality meteorology and atmospheric ozone, a symposium sponsored by ASTM Committee D-22 on Methods of Sampling and Analysis of Atmospheres, American Society for Testing and Materials, Boulder, Colo., 31 July-6 Aug. 1977 ; A. L. Morris, Ambient Analysis, Inc., and R. C. Barras, Bible Science Study Center, editors, (electronic book)

Borrow it

Airflow performance of building envelopes, components and systems, Mark P. Modera and Andrew K. Persily, editors, (electronic book)

Borrow it

Alkalies in concrete, a symposium sponsored by ASTM Committees C-9 on Concrete and Concrete Aggregates and C-1 on Cement, Los Angeles, Calif., 25 June 1985, Vance H. Dodson, W. R. Grace & Company, editor, (electronic book)

Borrow it

Alternative bearing surfaces in total joint replacement, Joshua J. Jacobs and Thomas L. Craig, editors, (electronic book)

Borrow it

Alternatives to chlorofluorocarbon fluids in the cleaning of oxygen and aerospace systems and components, Coleman J. Bryan and Karen Gebert-Thompson, editors, (electronic book)

Borrow it

An evaluation of the elevated temperature, tensile, and creep-rupture properties of wrought carbon steel, prepared for the Metals Properties Council by G. V. Smith, (electronic book)

Borrow it

An evaluation of the yield, tensile creep, and rupture strengths of wrought 304, 316, 321, and 347 stainless steels at elevated temperatures, prepared for the Metals Properties Council by G. V. Smith, (electronic book)

Borrow it

An introduction to the development and use of the master curve method, Donald E. McCabe, John G. Merkle, and Kim Wallin, (electronic book)

Borrow it

Analysis oF soils contaminated with petroleum constituents, Tracey A. O'Shay and Keith B. Hoddinott, editors, (electronic book)

Borrow it

Analysis of paints and related materials : current techniques for solving coatings problems, William C. Golton, editor, (electronic book)

Borrow it

Analysis of reactor vessel radiation effects surveillance programs, prepared under the auspices of The Metal Properties Council, by L. E. Steele and C. Z. Serpan, Jr, (electronic book)

Borrow it

Analysis of the test methods for high modulus fibers and composites : a symposium presented at a meeting of Committee D-30 on High Modulus Fibers and Their Composites, American Society for Testing and Materials, San Antonio, Tex., 12-13 April 1972, J. M. Whitney, symposium chairman, (electronic book)

Borrow it

Analysis of waters associated with alternative fuel prduction, a symposium sponsored by ASTM Committee D-19 on Water, American Society for Testing and Materials, Pittsburgh, Pa., 4-5 June 1979 ; L. P. Jackson and C. C. Wright, editors, (electronic book)

Borrow it

Analytical and experimental methods for residual stress effects in fatigue, Robert L. Champoux, John H. Underwood, and Joseph A. Kapp, editors, (electronic book)

Borrow it

Analytical methods developed for application to lunar samples analyses : a symposium presented at the seventy-fifth annual meeting, American Society for Testing and Materials, Los Angeles, Calif., 25-30 June 1972, D. A. Flory, symposium chairman, (electronic book)

Borrow it

Analytical techniques for hydraulic cements and concrete : a symposium presented at the sixty-eight annual meeting American Society for testing and materials, Lafayette, Indiana, June 15, 1965, (electronic book)

Borrow it

Appearance of metallic surfaces : a symposium presented at the seventy-first annual meeting, American Society for testing and materials, San Francisco, Calif., 23-28 June 1968, (electronic book)

Borrow it

Application of 2 1/4Cr-1Mo steel for thick-wall pressure vessels, a symposium sponsored by Metal Properties Council, American Society for Testing and Materials, Denver, Colo., 19-20 May 1980, G. S. Sangdahl, Chicago Bridge & Iron Company ; M. Semchyshen, Climax Molybdenum Company, editors, (electronic book)

Borrow it

Application of accelerated corrosion tests to service life prediction of materials, Gustavo Cragnolino and Narasi Sridhar, editors, (electronic book)

Borrow it

Application of advanced and nuclear physics to testing materials : a symposium presented at the international conference on materials, sponsored by American Society for Testing and Materials and International Union of Testing and Research Laboratories for Materials and Structures, Philadelphia, Pa., Feb. 3, 1964, (electronic book)

Borrow it

Application of agricultural analysis in environmental studies, Keith B. Hoddinott and Tracey A. O'Shay, editors, (electronic book)

Borrow it

Application of inductively coupled plasma-mass spectrometry to radionuclide determinations, second volume, Roy W. Morrow and Jeffrey S. Crain, editors, (electronic book)

Borrow it

Applications of automation technology in fatigue and fracture testing and analysis, fourth volume, A. A. Braun, P. C. McKeighan, A. M. Nicolson, and R. D. Lohr, editors, (electronic book)

Borrow it

Applications of automation technology to fatigue and fracture testing and analysis, third volume, A. A. Braun and L. N. Gilbertson, editors, (electronic book)

Borrow it

Applications of automation technology to fatigue and fracture testing, Arthur A. Braun, Noel E. Ashbaugh, and Fraser M. Smith, editors, (electronic book)

Borrow it

Applications of composite materials, edited by Michael J. Salkind, Ph.D., Chief, Structures and Materials, Sikorsky Aircraft Division of United Aircraft Corporation, Stratford, Connecticut ; Geoffry S. Holister, Ph.D., Dean and Director of Studies in Technology, The Open University, Bletchley, Buckinghamshire, England, (electronic book)

Borrow it

Applications of continuum damage mechanics to fatigue and fracture, David L. McDowell, editor, (electronic book)

Borrow it

Context

Context of Online access with Eduserv subscription agreement: ASTM Standards & Engineering Digital Library

Members

No resources found

No enriched resources found

1952 and 1953 Supplements to the bibliography and abstracts on electrical contacts
1954 Supplement to the metal cleaning bibliographical abstracts
1954 supplement to the bibliography and abstracts on electrical contacts
1955 Supplement to the bibliography and abstracts on electrical contacts
1956 References on fatigue
1956 Supplement to the bibliography and abstracts on electrical contacts
1957 Supplement to the bibliography and abstracts on electrical contacts
1957 references on fatigue
1957 references on fatigue
1957 supplement to the metal cleaning bibliographical abstracts
1958 supplement to the Bibliography and abstracts on electrical contacts
1958 symposium on bulk sampling : presented at the sixty-first annual meeting, American Society for Testing Materials, Boston, Mass., June 23, 1958
1959 supplement bibliographical abstracts of methods for analysis of synthetic detergents 1933-1959
1959 supplement to the bibliography and abstracts on electrical contacts
1959 supplement to the bibliography of spectrophotometric methods of analysis for inorganic ions : covering analytical chemistry, the analyst, and analytica chimica acta for the period 1952-1958
1960 References on fatigue
1960 Supplement to the bibliography and abstracts on electrical contacts
1960 supplement to the metal cleaning bibliographical abstracts
1961 Supplement to the bibliography and abstracts on electrical contacts
1962 Supplement to the bibliography and abstracts on electrical contacts
1963 Supplement to the bibliography and abstracts on electrical contacts, circuit breakers and arc phenomena
1964 references on fatigue (with additional 1963 references)
A Guide for fatigue testing and the statistical analysis of fatigue data
A Guide to the safe handling of hazardous materials accidents
A Guide to the safe handling of hazardous materials accidents
A Manual on methods for retrieving and correlating technical data
A comprehensive review of lubricant chemistry, technology, selection, and design
A manual for the chemical analysis of metals
ASTM manual for conducting an interlaboratory study of a test method
ASTM manual on consumer sensory evaluation
ASTM manual on fitting straight lines
ASTM manual on quality control of materials
ASTM manual on zirconium and hafnium
ASTM standards and engineering digital library
ASTM viscosity index calculated from kinematic viscosity
ASTM viscosity index calculated from kinematic viscosity
ASTM viscosity tables for kinematic viscosity conversions and viscosity index calculations
ASTM viscosity tables for kinematic viscosity conversions and viscosity index calculations
ASTM's role in performance-based fire codes and standards
Accelerated and outdoor durability testing of organic materials
Access security screening : challenges and solutions
Accreditation practices for inspections, tests, and laboratories
Achievement of high fatigue resistance in metals and alloys : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N. J., 22-27 June 1969
Acoustic emission
Acoustic emission : current practice and future directions
Acoustic emission : standards and technology update
Acoustic emission monitoring of pressurized systems
Acoustic emission testing of aerial devices and associated equipment used in the utility industries
Acoustic emissions in geotechnical engineering practice
Adhesion : presented at the sixty-sixth annual meeting, American Society for Testing and Materials, Atlantic City, N.J., June 26, 1963
Adhesion measurement of thin films, thick films, and bulk coatings
Adhesively bonded joints : testing, analysis, and design
Advanced composite materials-environmental effects
Advanced testing techniques : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N. J., 22-27 June 1969
Advanced triaxial testing of soil and rock
Advances in adhesives, adhesion science, and testing
Advances in electrochemical techniques for corrosion monitoring and measurement
Advances in electron metallography : a symposium presented at the sixty-eighth annual meeting, American Society for Testing and Materials, Lafayette, Ind., June 13-18, 1965, 6th volume
Advances in environmental measurement methods for asbestos
Advances in fatigue crack closure measurement and analysis, Second volume
Advances in fatigue lifetime predictive techniques
Advances in fatigue lifetime predictive techniques, 2nd volume
Advances in fatigue lifetime predictive techniques, 3rd volume
Advances in geosynthetic clay liner technology, 2nd Symposium
Advances in luminescence spectroscopy
Advances in multiaxial fatigue
Advances in the production and use of steel with improved internal cleanlines
Advances in the state of the art of fire testing
Advances in the technology of stainless steels and related alloys
Advances in thermoplastic matrix composite materials
Aggregate contribution to hot mix asphalt (HMA) performance
Air change rate and airtightness in buildings
Air quality and comfort in airliner cabins
Air quality meteorology and atmospheric ozone
Airflow performance of building envelopes, components and systems
Alkalies in concrete
Alternative bearing surfaces in total joint replacement
Alternatives to chlorofluorocarbon fluids in the cleaning of oxygen and aerospace systems and components
An evaluation of the elevated temperature, tensile, and creep-rupture properties of wrought carbon steel
An evaluation of the yield, tensile creep, and rupture strengths of wrought 304, 316, 321, and 347 stainless steels at elevated temperatures
An introduction to the development and use of the master curve method
Analysis oF soils contaminated with petroleum constituents
Analysis of paints and related materials : current techniques for solving coatings problems
Analysis of reactor vessel radiation effects surveillance programs
Analysis of the test methods for high modulus fibers and composites : a symposium presented at a meeting of Committee D-30 on High Modulus Fibers and Their Composites, American Society for Testing and Materials, San Antonio, Tex., 12-13 April 1972
Analysis of waters associated with alternative fuel prduction
Analytical and experimental methods for residual stress effects in fatigue
Analytical methods developed for application to lunar samples analyses : a symposium presented at the seventy-fifth annual meeting, American Society for Testing and Materials, Los Angeles, Calif., 25-30 June 1972
Analytical techniques for hydraulic cements and concrete : a symposium presented at the sixty-eight annual meeting American Society for testing and materials, Lafayette, Indiana, June 15, 1965
Appearance of metallic surfaces : a symposium presented at the seventy-first annual meeting, American Society for testing and materials, San Francisco, Calif., 23-28 June 1968
Application of 2 1/4Cr-1Mo steel for thick-wall pressure vessels
Application of accelerated corrosion tests to service life prediction of materials
Application of advanced and nuclear physics to testing materials : a symposium presented at the international conference on materials
Application of agricultural analysis in environmental studies
Application of inductively coupled plasma-mass spectrometry to radionuclide determinations, second volume
Applications of automation technology in fatigue and fracture testing and analysis, fourth volume
Applications of automation technology to fatigue and fracture testing
Applications of automation technology to fatigue and fracture testing and analysis, third volume
Applications of composite materials
Applications of continuum damage mechanics to fatigue and fracture
Applications of electron microfractography to materials research : a symposium presented at the seventy-third annual meeting, American Society for Testing and Materials, Toronto, Ont., Canada, 21-26 June 1970
Applications of inductively coupled plasma-mass spectrometry to radionuclide determinations
Applications of modern metallographic techniques : a symposium presented at the Materials Engineering Exposition and Congress American Society for Metals Philadelphia, Pa., 13-16 Oct. 1969
Applications of radiation thermometry
Applications related phenomena in titanium alloys : a symposium presented at a meeting of Committee B-10 on Reactive & Refractory Metals and Alloys, American Society for Testing and Materials, Los Angeles, Calif., 18-19 April, 1967
Applications-related phenomena in zirconium and its alloys
Applied surface analysis
Aquatic invertebrate bioassays
Aquatic toxicology : proceedings of the Second Annual Symposium on aquatic toxicology
Aquatic toxicology : proceedings of the third annual symposium on aquatic toxicology
Aquatic toxicology and environmental fate, Eleventh volume
Aquatic toxicology and environmental fate, ninth volume
Aquatic toxicology and hazard assessment : proceedings of the fifth annual symposium on aquatic toxicology
Aquatic toxicology and hazard assessment : proceedings of the fourth annual symposium on aquatic toxicology
Aquatic toxicology and hazard assessment, 10th volume
Aquatic toxicology and hazard assessment, 12th volume
Aquatic toxicology and hazard assessment, Eighth symposium
Aquatic toxicology and hazard assessment, Seventh symposium
Aquatic toxicology and hazard assessment, sixth symposium
Aquatic toxicology and hazard evaluation : proceedings of the first annual symposium on aquatic toxicology
Aquatic toxicology and risk assessment, fourteenth volume
Aquatic toxicology and risk assessment, thirteenth volume
Articles on fatigue : references to articles published in 1950 dealing with fatigue
Asbestos control : surveys, removal, and management
Aspects of lubricant oxidation
Asphalt concrete mix design : development of more rational approaches
Asphalt emulsions
Asphalt pavement construction : new materials and techniques
Asphalt rheology : relationship to mixture
Assignment of the glass transition
Atlas of odor character profiles
Atmospheric corrosion
Atmospheric corrosion investigation of aluminum-coated, zinc-coated, and copper-bearing steel wire and wire products (a twelve year report)
Atmospheric corrosion investigation of aluminum-coated, zinc-coated, and copper-bearing steel wire and wire products : a thirty-two year report
Atmospheric corrosion investigation of aluminum-coated, zinc-coated, and copper-bearing steel wire and wire products, a twenty-year report
Atmospheric corrosion of metals
Atmospheric factors affecting the corrosion of engineering metals : proceedings of the golden anniversary symposium commemorating 50 years' atmospheric exposure testing
Atomic absorption spectroscopy : a symposium presented at the Seventy-First Annual Meeting, American Society for Testing and Materials, San Francisco, Calif., 23-28 June, 1968
Automated analyzers and quality control for the petroleum industry : a symposium presented at a meeting of Committee D-2 on Petroleum Products and Lubricants, American Society for Testing and Materials, Houston, Tex., 1 Dec., 1966
Automated manufacturing
Automated test methods for fracture and fatigue crack growth
Automation in fatigue and fracture : testing and analysis
Automation of mechanical testing
Automotive gasoline performance and information system
Automotive lubricant testing and advanced additive development
Avian and mammalian wildlife toxicology
Avian and mammalian wildlife toxicology, second conference
Aviation fuel : thermal stability requirements
Aviation fuel quality control procedures
Bacterial indicators/health hazards associated with water
Basic principles of sensory evaluation
Basic questions in fatigue, volume I
Basic rubber testing : selecting methods for a rubber test program
Bearing steel technology
Bearing steel technology : developments in rolling bearing steels and testing, 8th volume
Bearing steel technology-advances and state of the art in bearing steel quality assurance, 7th volume
Bearing steels : into the 21st century
Bearing steels, the rating of nonmetallic inclusion : a symposium presented at May Committee Week, American Society for Testing and Materials, Boston, Mass., 22-24 May 1974
Behavior of deep foundations
Behavior of materials at cryogenic temperatures : a symposium presented at the sixty-eighth annual meeting, American Society for Testing and Materials, Lafayette, Ind., June 13-18, 1965
Behavior of polymeric materials in fire
Bench testing of industrial fluid lubrication and wear properties used in machinery applications
Beryllium : sampling and analysis
Bibliographical abstracts of methods for analysis of synthetic detergents
Bibliographical abstracts of methods for analysis of synthetic detergents 1933-1957
Bibliographical abstracts of methods for analysis of synthetic detergents, 1888-1956
Bibliographical abstracts on evaluation of brightening agents for detergent usage
Bibliographical abstracts on evaluation of brightening agents for detergent usage [1929-1961]
Bibliographical abstracts on evaluation of fluorescent whitening agents, 1929-1968
Bibliographical abstracts on redeposition of soil on cotton fabric
Bibliography and abstracts on electrical contacts (1835ا1951)
Bibliography and abstracts on electrical contacts, circuit breakers, and arc phenomena
Bibliography and abstracts on primary soil deposition, 1931-1961 : prepared for Subcommittee T-5 on Physical Testing of Committee D-12 on Soaps and Other Detergents, of the American Society for Testing and Materials
Bibliography and abstracts on thermostat metals 1960-1961
Bibliography and abstracts on thermostat metals, 1806-1959
Bibliography of photoelectric spectrophotometric methods of analysis for inorganic ions
Bibliography on low-cycle fatigue 1957-1967, part I, sub-divided references
Biofuels
Biological contaminants in indoor environments
Biological data in water pollution assessment : quantitative and statistical analyses
Biological methods for the assessment of water quality : a symposium presented at the seventy-fifth annual meeting, American Society for Testing and Materials
Biological monitoring of water and effluent quality
Biomaterials' mechanical properties
Bioprocessing safety : worker and community safety and health considerations
Bioremediation of pollutants in soil and water
Bituminous paving materials : Symposium on Methods of Test for Design of Bituminous Paving Mixtures : Symposium on Practical and Statistical Significance of Tests and Properties of Bituminous Binders : Session on Road and Paving Materials : presented at the sixty-second annual meeting, American Society for Testing Materials Atlantic City, N. J., June 23, 24, 25, 1959
Black box data from accident vehicles : methods of retrieval, translation, and interpretation
Blended cements
Bone graft substitutes
Building air change rate and infiltration measurements
Building applications of heat flux transducers
Building deck waterproofing
Building façade maintenance, repair, and inspection
Building performance : function, preservation, and rehabilitation
Building seals and sealants
Building security
Buildings sealants : materials, properties, and performance
Buried plastic pipe technology
Buried plastic pipe technology, 2nd volume
Business performance excellence through total quality management
Calculation of physical properties of petroleum products from gas chromatographic analyses
Calibration in air monitoring : a symposium presented at the University of Colorado at Boulder, Colo., 5-7 Aug. 1975, American Society for Testing and Materials
Carbonate additions to cement
Case histories involving fatigue and fracture mechanics
Case studies for fatigue education
Cell-culture test methods
Cement and Concrete : presented at the Second Pacific Area National Meeting, Los Angeles, Calif., September 19 and 20, 1956, American Society for Testing Materials
Cement standards, evolution and trends
Cement, comparison of standards and significance of particular tests : a symposium presented at the seventieth annual meeting, American Society for Testing and Materials, Boston, Mass., 25-30 June, 1967
Changes in characteristics of portland cement as exhibited by laboratory tests over the period 1904 to 1950 : presented at the fifty-fourth annual meeting, American Society for Testing Materials, Atlantic City, N.J., June 21, 1951
Characterization and determination of erosion resistance : a symposium presented at the seventy-second annual meeting, American Society for Testing and Materials, Atlantic City, N. J. 22-27 June 1969
Characterization and performance of calcium phosphate coatings for implants
Characterization and properties of petroleum fractions
Characterization and properties of ultra-high molecular weight polyethylene
Characterization and toxicity of smoke
Characterizing sources of indoor air pollution and related sink effects
Charpy impact test : factors and variables
Chemical analysis of metals
Chemical and biological characterization of municipal sludges, sediments, dredge spoils, and drilling muds
Chemical dispersants for the control of oil spills
Chemical protective clothing performance in chemical emergency response
Chevron-notch fracture test experience : metals and non-metals
Chevron-notched specimens, testing and stress analysis
Child-resistant packaging
Chloride corrosion of steel in concrete : a symposium presented at the seventy-ninth annual meeting, American Society for Testing and Materials, Chicago, Ill., 27 June-2 July 1976, D. E. Tonini, American Hot Dip Galvanizers Association, Inc. ; S. W. Dean, Jr., Air Products and Chemicals, Inc., editors
Cleaning stone and masonry
Cleanup criteria for contaminated soil and groundwater
Clinical laboratory performance of bone plates
Cobalt-base alloys for biomedical applications
Coden for periodical titles : an aid to the storage and retrieval of information and to communication involving journal references
Cold cleaning with halogenated solvents
Cold cleaning with halogenated solvents
Commercial opportunities for advanced composites
Common ground, consensus building and continual improvement : Standards and sustainable building first international symposium
Community noise
Community toxicity testing
Compaction of soils
Comparison of the properties of basic oxygen and open hearth steels
Compilation and index of trade names, specifications, and producers of stainless alloys and superalloys
Compilation of chemical compositions and rupture strengths of super-strength alloys : issued under the Auspices of Subcommittee XII on Specifications for High-Temperature, Super-Strength Alloys Of ASTM Committee A-10 On Iron-Chromium, Iron-Chromium-Nickel, and Related Alloys
Compilation of chemical compositions and rupture strengths of super-strength alloys : issued under the auspices of Subcommittee XII on Specifications for High-Temperature, Superstrength Alloys of ASTM Committee A-10 on Iron-Chromium, Iron-Chromium-Nickel, and Related Alloys
Compilation of chemical compositions and rupture strengths of superalloys
Compilation of chemical compositions and rupture strengths of superstrength alloys
Compilation of chemical compositions and rupture strengths of superstrength alloys
Compilation of gas chromatographic data
Compilation of gas chromatographic data
Compilation of odor and taste threshold values data
Compilation of odor and taste threshold values data
Compilation of stress-relaxation data for engineering alloys
Composite materials : fatigue and fracture
Composite materials : fatigue and fracture, fourth volume
Composite materials : fatigue and fracture, seventh volume
Composite materials : fatigue and fracture, third volume
Composite materials : testing and design
Composite materials : testing and design, 10th volume
Composite materials : testing and design, Eleventh volume
Composite materials : testing and design, fifth conference
Composite materials : testing and design, twelfth volume
Composite materials : testing, design, and acceptance criteria
Composite materials for implant applications in the human body : characterization and testing
Composite materials, fatigue and fracture, fifth volume
Composite materials, fatigue and fracture, second volume
Composite materials, testing and design : third conference
Composite materials, testing and design, (2nd Conference)
Composite materials, testing and design, (4th conference)
Composite materials, testing and design, 8th Conference
Composite materials, testing and design, fourteenth volume
Composite materials, testing and design, ninth volume
Composite materials, testing and design, seventh conference
Composite materials, testing and design, sixth conference
Composite materials, testing and design, thirteenth volume
Composite materials: quality assurance and processing
Composite reliability : a symposium presented at Las Vegas, Nev., 15-16 April 1974, American Society for Testing and Materials, E. M, Wu, symposium chairman
Composite structures : theory and practice
Composites bonding
Composites for extreme environments
Composites materials : fatigue and fracture, sixth volume
Compositional analysis by thermogravimetry
Compression response of composite structures
Compression testing of homogeneous materials and composites
Computer automation of materials testing
Computer modeling in corrosion
Computerization and data management in the metals analysis laboratory
Computerization and networking of materials data bases
Computerization and networking of materials databases, Fifth volume
Computerization and networking of materials databases, fourth volume
Computerization and networking of materials databases, second volume
Computerization and networking of materials databases, third volume
Computerized chemical data standards : databases, data interchange, and information systems
Computerized laboratory systems : a symposium presented at the Pittsburgh Conference, American Society for Testing and Materials, Cleveland, Ohio, 4-5 March 1974
Computerized quantitative infrared analysis
Concrete pipe and the soil-structure system
Concrete pipe for the new millennium
Condensation in exterior building wall systems
Consolidation of soils : testing and evaluation
Constraint effects in fracture
Constraint effects in fracture theory and applications, second volume
Constructing smooth hot mix asphalt (HMA) pavements
Contaminated sediments : characterization, evaluation, mitigation/restoration, and management strategy performance
Contaminated sediments : evaluation and remediation techniques
Contaminated sediments : sustainable management and remediation
Continuous anesthesia gas monitoring
Continuous measurement of the cure rate of rubber
Contructing and controlling compaction of earth fills
Correlating sensory objective measurements new methods for answering old problems
Correlation of deep-drawing press performance with tensile properties : a report on cooperative research of the usa committee of the international deep drawing research group
Correlation of subjective-objective methods in the study of odors and taste : a symposium presented at the seventieth annual meeting, American Society for Testing and Materials, Boston, Mass., 25-30 June, 1967
Corrosion and degradation of implant materials
Corrosion and degradation of implant materials, second symposium
Corrosion effect of stray currents and the techniques for evaluating corrosion of rebars in concrete
Corrosion effect of stray currents and the techniques for evaluating corrosion of rebars in concrete
Corrosion fatigue : mechanics, metallurgy, electrochemistry, and engineering
Corrosion forms and control for infrastructure
Corrosion in natural environments : three symposia presented at the seventy-sixth annual meeting, American Society for Testing and Materials, Philadelphia, Pa., 24-29 June 1973
Corrosion in natural waters
Corrosion monitoring in industrial plants using nondestructive testing and electrochemical methods
Corrosion of electronic and magnetic materials
Corrosion of metals in association with concrete
Corrosion of metals under thermal insulation
Corrosion of reinforcing steel in concrete
Corrosion of zirconium alloys : a symposium presented at the 1963 Winter Meeting, American Nuclear Society, New York, N.Y., November 20, 1963
Corrosion rates of steel in concrete
Corrosion testing and evaluation : silver anniversary volume
Corrosion testing in natural waters, second volume
Corrosion tests and standards : application and interpretation
Corrosion-fatigue technology : a symposium presented at November Committee Week, American Society for Testing and Materials, Denver, Colo., 14-19 Nov. 1976
Crack arrest methodology and applications
Cracks and fracture : proceedings of the ninth national symposium on fracture mechanics
Creative applications : sensory techniques used in conducting packaging research with consumers
Creative use of bearing steels
Creep of zirconium alloys in nuclear reactors
Creep-fatigue interactions : test methods and models
Crosslinked and thermally treated ultra-high molecular weight polyethylene for joint replacements
Crude oils : their sampling, analysis, and evaluation
Cryogens and gases : testing methods and standards development, a symposium presented at the seventy-fifth annual meeting, American Society for Testing and Materials, Los Angeles, Calif., 25-30 June 1972
Current practices in ground water and vadose zone investigations
Current technologies in flexible packaging
Current trends in protective packaging of computers and electronic components
Cyclic cabinet corrosion testing
Cyclic deformation, fracture, and nondestructive evaluation of advanced materials
Cyclic deformation, fracture, and nondestructive evaluation of advanced materials, second volume
Cyclic stress-strain and plastic deformation aspects of fatigue crack growth
Cyclic stress-strain behavior - analysis, experimentation, and failure prediction
Damage detection in composite materials
Damage in composite materials : basic mechanisms, accumulation, tolerance, and characterization
Damage in laser glass
Damage tolerance in aircraft structures : a symposium presented at the seventy-third annual meeting American Society for Testing and Materials, Toronto, Ontario, Canada, 21-26 June 1970
Damage tolerance of metallic structures : analysis methods and applications
Data on corrosion-and heat-resistant steels and alloys, wrought and cast
Deep foundation improvements : design, construction, and testing
Definitions for asbestos and other health-related silicates
Deformation mechanisms, texture, and anisotropy in zirconium and Zircaloy
Degradation of metals in the atmosphere
Delamination and debonding of materials
Design and protocol for monitoring indoor air quality
Design and tests of building structures : symposiums on seismic and shock loading, glued laminated and other constructions, presented at the Second Pacific Area National Meeting Los Angeles, Calif., September 17, 1956, American Society for Testing Materials
Design of buildings for fire safety
Design of fatigue and fracture resistant structures
Designing cathodic protection systems for marine structures and vehicles
Determination of nonmetallic compounds in steel
Determination of stress in rock : a state-of-the-art report, a symposium presented at the sixty-ninth annual meeting, American Society for Testing and Materials, Atlantic City, N.J., 26 June-1 July, 1966
Determination of the in situ modulus of deformation of rock
Determination of the shear stability of non-newtonian liquids
Determination of the spectrochemical working curve : a symposium presented at the Pittsburgh Conference Cleveland, Ohio, 6 March 1974
Development of fatigue loading spectra
Developments in fracture mechanics test methods standardization : a symposium presented at St. Louis, Mo., 4 May 1976
Diesel fuel oil : a symposium presented at the sixty-ninth annual meeting, American Society for Testing and Materials, Atlantic City, N.J., June 26-July 1,1966
Dimension Stone Use in Building Construction
Dimension stone cladding : design, construction, evaluation, and repair
Direct-current magnetic hysteresigraphs
Direct-current magnetic measurements for soft magnetic materials
Discussion on statistical quality control in its application to specification requirements : Pittsburgh Spring Meeting, American Society for Testing Materials, February 26, 1946
Dispersive clays, related piping, and erosion in geotechnical projects
Disposal of oil and debris resulting from a spill cleanup operation
Disposal of plastics with minimum environmental impact
Distillate fuel : contamination, storage, and handling
Distillate fuel stability and cleanliness
Distillation and vapor pressure measurement in petroleum products