#
Strains and stresses
Resource Information
The concept ** Strains and stresses** represents the subject, aboutness, idea or notion of resources found in **University of Liverpool**.

The Resource
Strains and stresses
Resource Information

The concept

**Strains and stresses**represents the subject, aboutness, idea or notion of resources found in**University of Liverpool**.- Label
- Strains and stresses

## Context

Context of Strains and stresses#### Subject of

No resources found

No enriched resources found

- A Method of calculating the compressive strength of Z-stiffened panels that develop local instability
- A practical approach to theoretical stress analysis: or where do you find it in "Roark" and how do you use it effectively
- A summary of diagonal tension, Part 1, Methods and analysis
- A summary of diagonal tension, Part 2, Experimental evidence
- Advanced mechanics of materials
- Advanced strength and applied stress analysis
- An introduction to extremum principles
- Analysis of beams on elastic foundations : using finite difference theory
- Analysis of step-stress models : existing results and some recent developments
- Analysis of welded structures: residual stresses, distortion and their consequences
- Approximate stress analysis of multistringer beams with shear deformation of the flanges
- Bending of rectangular plates with large deflections
- Buckling of thin-walled cylinder under axial compression and internal pressure
- Charts for calculation of the critical compressive stress for local instability of idealized web- and T-stiffened panels
- Charts for calculation of the critical stress for local instability of columns with I-, Z-, channel, and rectangular-tube section
- Compressive buckling of simply supported curved plates and cylinders of sandwich construction
- Concrete structures : stresses and deformations
- Control of welding distortion in thin-plate fabrication : design support exploiting computational simulation
- Critical combinations of shear and direct axial stress for curved rectangular panels
- Critical combinations of shear and longitudinal direct stress for long plates with transverse curvature
- Critical combinations of torsion and direct axial stress for thin-walled cylinders
- Critical stress for an infinitely long flat plate with elastically restrained edges under combined shear and direct stress
- Critical stress of thin-walled cylinders in torsion
- Critical-stress of thin-walled cylinders in axial compression
- Damping technologies for tall buildings : theory, design guidance and case studies
- Damping technologies for tall buildings : theory, design guidance and case studies
- Deformation analysis of wing structures
- Description of stress-strain curves by three parameters
- Design of concrete structures using high-strength steel reinforcement
- Developments in stress analysis, 1
- Economics of construction in relation to framed structures
- Economics of construction in relation to framed structures
- Effect of normal pressure on the critical compressive and shear stress of curved sheet
- Effect of normal pressure on the critical compressive stress of curved sheet
- Elastic stresses in structures : translated from Castigliano's ThÃ©orem de l'equibre des systÃ¨mes Ã©lastiques et ses applications
- Elements of experimental stress analysis
- Elements of stress analysis
- Energy methods in stress analysis
- Energy methods in stress analysis with an introduction to finite element techniques
- Engineering mechanics, Volume 2 :, stresses, strains, displacements
- Experimental investigation of the effects of plastic flow in a tension panel with a circular hole
- Experimental stress analysis
- Extensibility and compressibility in one-dimensional structures: cables, tension rods, compression rods, frames and arches
- Flat sheet metal girder with very thin metal web : Part 3 : Sheet metal girders with spars resistant to bending - the stress in uprights - diagonal tension fields
- Folding and fracturing of rocks
- Formulas for stress and strain
- Fundamentals of seismic loading on structures
- Fundamentals of strength : principles, experiment, and applications of an internal state variable constitutive formulation
- Geological strain analysis: a manual for the Rf/Ã˜ method
- HALT, HASS, and HASA explained : accelerated reliability techniques
- Handbook of structural stability, Part 1, Buckling of flat plates
- Handbook of structural stability, Part 2, Buckling of composite elements
- Handbook of structural stability, Part 3, Buckling of curved plates and shells
- Handbook of structural stability, Part 4, Failure of plates and composite elements
- Handbook of structural stability, Part 5, Compressive strength of flat stiffened panels
- Handbook of structural stability, Part VI, Strength of stiffened curved plates and shells
- In-service fatigue reliability of structures
- Introduction to finite strain theory for continuum elasto-plasticity
- Introduction to pipe stress analysis
- Limit states of materials and structures : direct methods
- Manual on experimental stress analysis
- Materials at high strain rates
- Mechanical properties at high rates of strain, 1984
- Mechanical properties of materials at high rates of strain, 1989
- Mechanics of material forces
- Mechanics of material forces
- Mechanics of materials 2 : an introduction to the mechanics of elastic and plastic deformation of solids and structural materials
- Mechanics of materials and interfaces : the disturbed state concept
- Mechanics of solids and structures
- Mechanics of solids and structures
- Michell structures
- Minimum design loads and associated criteria for buildings and other structures
- Minimum design loads for buildings and other structures.
- Modeling and estimation of structural damage
- Modern experimental stress analysis : completing the solution of partially specified problems
- Mohr circles, stress paths and geotechnics
- Mohr circles, stress paths and geotechnics
- Moire analysis of strain
- Pipe stress engineering
- Practical stress analysis in engineering design
- Practical stress analysis in engineering design
- Practical stress analysis in engineering design
- Practical stress analysis in engineering design.
- Practical stress analysis in engineering design.
- Practical stress analysis with finite elements
- Process vessels subject to explosion risk : design guidelines for the pressure rating of weak process vessels subject to explosion risk
- Processing materials: how and why
- Rayonnement synchrotron, rayons X et neutrons au service des matÃ©riaux : analyse des contraintes et des textures
- Rectangular shell plating under uniformly distributed hydrostatic pressure
- Relaxation methods in engineering science: a treatise on approximate computation
- Roark's formulas for stress and strain
- Robust speckle metrology techniques for stress analysis and NDT
- Robust structural design against self-excited vibrations
- Some investigations of the general instability of stiffened metal cylinders : 8 - Stiffened metal cylinders subjected to pure torsion
- Statics and kinematics of granular materials
- Statics and strength of materials for architecture and building construction
- Strain effect in semiconductors : theory and device applications
- Strain mechanisms in lead-free ferroelectrics for actuators
- Strain-induced effects in advanced MOSFETs
- Strength of materials for technology
- Stress analysis for creep
- Stress analysis of notch problems: stress solutions to a variety of notch geometries used in engineering design
- Stress analysis of polymers
- Stress analysis problems in S.I. units
- Stress and strain concentration at a circular hole in an infinite plate
- Stress field of the Earth's crust
- Stress problems in pressurized cabins
- Stress, strain, and structural dynamics : an interactive handbook of formulas, solutions, and MATLAB toolboxes
- Stresses around rectangular cut-outs in skin-stringer panels under axial loads - II
- Structural and stress analysis
- Structural and stress analysis
- Structural impact
- Tensile properties of 7075-T6 and 2024-T3 aluminum-alloy sheet heated at uniform temperature rates under constant load
- Tension fields in originally curved, thin sheets during shearing stresses
- The Kolsky-Hopkinson bar machine : selected topics
- The effect of internal pressure on the buckling stress of thin-walled circular cylinders under torsion
- The strength and stiffness of shear webs with and without lightening holes
- The strength of shell bodies-- theory and practice
- The stress analysis of cracks handbook
- Theory of elastic stability
- Thermal stress resistance of materials
- Torsion and shear stresses in ships
- Transactions of the American Society of Civil Engineers, vol. LXX, Dec. 1910 Expansion of Pipes, Paper No. 1167
- Wire ropes : tension, endurance, reliability

## Embed

### Settings

Select options that apply then copy and paste the RDF/HTML data fragment to include in your application

Embed this data in a secure (HTTPS) page:

Layout options:

Include data citation:

<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.liverpool.ac.uk/resource/nmyWYDhAW9I/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.liverpool.ac.uk/resource/nmyWYDhAW9I/">Strains and stresses</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.liverpool.ac.uk/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.liverpool.ac.uk/">University of Liverpool</a></span></span></span></span></div>

Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements

### Preview

## Cite Data - Experimental

### Data Citation of the Concept Strains and stresses

Copy and paste the following RDF/HTML data fragment to cite this resource

`<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.liverpool.ac.uk/resource/nmyWYDhAW9I/" typeof="CategoryCode http://bibfra.me/vocab/lite/Concept"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.liverpool.ac.uk/resource/nmyWYDhAW9I/">Strains and stresses</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.liverpool.ac.uk/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.liverpool.ac.uk/">University of Liverpool</a></span></span></span></span></div>`